Home » Garmin Manuals » Marine Electronics » Garmin GPSMAP 7608xsv » Manual Viewer

Garmin GPSMAP 7608xsv Owner s Manual - Page 38

Tide, Current, and Celestial, Information, Warning Manager, Media Player

View all Garmin GPSMAP 7608xsv manuals

Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

• To view true or apparent wind, select Wind, and select an option. Viewing Trip Gauges Trip gauges show information for odometer, speed, time, and fuel for your present trip. Select Info > Trip & Graphs > Trip. Resetting Trip Gauges 1 Select Info > Trip & Graphs > Trip. 2 Select an option: • To set all the readings for the present trip to zero, select Reset Trip. • To set the maximum speed reading to zero, select Reset Maximum Speed. • To set the odometer reading to zero, select Reset Odometer. • To set all the readings to zero, select Reset All. Viewing Graphs Before you can view graphs of various environmental changes, such as temperature, depth, and wind, you must have an appropriate transducer or sensor connected to the network. Select Info > Trip & Graphs > Graphs. Setting the Graph Range and Time Scales You can indicate the amount of time and the range of depth that appear in the depth and water temperature graphs. 1 From a graph, select Graph Setup. 2 Select an option: • To set a time-elapsed scale, select Duration. The default setting is 10 minutes. Increasing the time-elapsed scale allows you to view variations over a longer period of time. Decreasing the time-elapsed scale allows you to view more detail over a shorter period of time. • To set the graph scale, select Scale. Increasing the scale allows you to view more variation in readings. Decreasing the scale allows you to view more detail in the variation. Tide, Current, and Celestial Information overhead, and the outermost rings represent the horizon. By default, the chartplotter shows celestial information for the present date and time. Select Info > Tides & Currents > Celestial. Viewing Tide Station, Current Station, or Celestial Information for a Different Date 1 Select Info > Tides & Currents. 2 Select Tides, Currents, or Celestial. 3 Select an option. • To view information for a different date, select Change Date > Manual, and enter a date. • To view information for today, select Change Date > Current. • If available, to view information for the day after the date shown, select Next Day. • If available, to view information for the day before the date shown, select Previous Day. Viewing Information for a Different Tide or Current Station 1 Select Info > Tides & Currents. 2 Select Tides or Currents. 3 Select Nearby Stations. 4 Select a station. Viewing Almanac Information from the Navigation Chart 1 From a chart or 3D chart view, select a location. 2 Select Information. 3 Select Tides, Currents, or Celestial. Warning Manager Viewing Messages 1 Select Info > Warning Manager. 2 Select a message. 3 Select Review. Tide Station Information You can view information about a tide station for a specific date and time, including the tide height, and when the next high and low tides will occur. By default, the chartplotter shows tide information for the most recently viewed tide station and for the present date and time. Select Info > Tides & Currents > Tides. Current Station Information NOTE: Current station information is available with certain detailed maps. You can view information about a current station for a specific date and time, including the current speed and level of the current. By default, the chartplotter shows current information for the most recently viewed current station and for the present date and time. Select Info > Tides & Currents > Currents. Celestial Information You can view information about sunrise, sunset, moonrise, moonset, moon phase, and the approximate sky view location of the sun and moon. The center of the screen represents the sky Sorting and Filtering Messages 1 Select Info > Warning Manager > Sort/Filter. 2 Select an option to sort or filter the message list. Saving Messages to a Memory Card 1 Insert a memory card into the card slot. 2 Select Info > Warning Manager > Save to Card. Clearing all of the Messages Select Info > Warning Manager > Clear Warning Manager. Media Player NOTE: The media player feature is not compatible with all chartplotter models. If you have a FUSION-Link™ capable stereo connected to the NMEA 2000 network, you can control the stereo using the chartplotter. The chartplotter should automatically detect the media player when it is first connected. You can play media from sources connected to the media player and sources connected to the NMEA 2000 network. Your 32 Tide, Current, and Celestial Information

Section	Page
Table of Contents	3
Introduction	7
Device Overview	7
Using the Touchscreen	7
On-Screen Buttons	7
Tips and Shortcuts	7
Locking the Touchscreen	7
Accessing Owner's Manuals on the Chartplotter	7
Downloading the Manuals	7
Getting More Information	7
Inserting Memory Cards	7
Software Update	8
Loading the New Software on a Memory Card	8
Updating the Device Software	8
GPS Satellite Signals	8
Selecting the GPS Source	8
Customizing the Chartplotter	8
Home Screen	8
Adding an Item to Favorites	8
Customizing the Layout of a SmartMode or Combination Page	8
Adding a SmartMode Layout	9
Adding a Custom Combination Screen	9
Customizing the Data Overlays	9
Resetting the Station Layouts	9
Setting the Vessel Type	9
Adjusting the Backlight	9
Adjusting the Color Mode	9
Presets	9
Saving a New Preset	9
Managing Presets	9
Charts and 3D Chart Views	10
Navigation Chart and Offshore Fishing Chart	10
Zooming In and Out Using the Touchscreen	10
Selecting a Map	10
Measuring a Distance on the Chart	10
Chart Symbols	10
Showing a Different Chart	10
Creating a Waypoint on the Chart	10
Viewing Location and Object Information on a Chart	10
Viewing Details about Navaids	11
Navigating to a Point on the Chart	11
Heading Line and Angle Markers	11
Setting the Heading and Course Over Ground Lines	11
Turning on Angle Markers	11
Premium Charts	11
Viewing Tide Station Information	11
Animated Tide and Current Indicators	12
Showing Tides and Current Indicators	12
Showing Satellite Imagery on the Navigation Chart	12
Viewing Aerial Photos of Landmarks	12
Garmin Quickdraw™‎ Contours Mapping	12
Mapping a Body of Water Using the Garmin Quickdraw Contours Feature	12
Adding a Label to a Garmin Quickdraw Contours Map	12
Garmin Quickdraw Contours Settings	12
Automatic Identification System	13
AIS Targeting Symbols	13
Heading and Projected Course of Activated AIS Targets	13
Showing AIS and MARPA Vessels on a Chart or on a 3D Chart View	13
Activating a Target for an AIS Vessel	13
Viewing Information about a Targeted AIS Vessel	13
Deactivating a Target for an AIS Vessel	13
Viewing a List of AIS and MARPA Threats	13
Setting the Safe-Zone Collision Alarm	14
AIS Distress Signals	14
Navigating to a Distress Signal Transmission	14
AIS Distress Signal Device Targeting Symbols	14
Enabling AIS Transmission Test Alerts	14
Turning Off AIS Reception	14
Chart and 3D Chart View Settings	14
Navigation and Fishing Chart Setup	14
Waypoints and Tracks Settings on the Charts and Chart Views	15
Chart Appearance Settings	15
Other Vessels Settings on the Charts and Chart Views	15
Laylines Settings	15
Fish Eye 3D Settings	15
Navigation with a Chartplotter	15
Basic Navigation Questions	16
Destinations	16
Searching for a Destination by Name	16
Selecting a Destination Using the Navigation Chart	16
Searching for a Marine Services Destination	16
Stopping Navigation	16
Waypoints	16
Marking Your Present Location as a Waypoint	16
Creating a Waypoint at a Different Location	16
Marking an SOS Location	16
Viewing a List of all Waypoints	16
Editing a Saved Waypoint	16
Moving a Saved Waypoint	17
Browsing for and Navigating to a Saved Waypoint	17
Deleting a Waypoint or an MOB	17
Deleting All Waypoints	17
Setting and Following a Direct Course Using Go To	17
Routes	17
Creating and Navigating a Route From Your Present Location	17
Creating and Saving a Route	17
Viewing a List of Routes and Auto Guidance Paths	17
Editing a Saved Route	17
Browsing for and Navigating a Saved Route	18
Browsing for and Navigating Parallel to a Saved Route	18
Deleting a Saved Route	18
Deleting All Saved Routes	18
Auto Guidance	18
Setting and Following an Auto Guidance Path	18
Creating and Saving an Auto Guidance Path	18
Adjusting a Saved Auto Guidance Path	18
Canceling an Auto Guidance Calculation in Progress	18
Setting a Timed Arrival	18
Auto Guidance Line Configurations	19
Adjusting the Distance from Shore	19
Tracks	19
Showing Tracks	19
Setting the Color of the Active Track	19
Saving the Active Track	19
Viewing a List of Saved Tracks	19
Editing a Saved Track	19
Saving a Track as a Route	20
Browsing for and Navigating a Recorded Track	20
Deleting a Saved Track	20
Deleting All Saved Tracks	20
Retracing the Active Track	20
Clearing the Active Track	20
Managing the Track Log Memory During Recording	20
Configuring the Recording Interval of the Track Log	20
Boundaries	20
Creating a Boundary	20
Converting a Route to a Boundary	20
Converting a Track to a Boundary	20
Editing a Boundary	20
Setting a Boundary Alarm	20
Deleting a Boundary	20
Synchronizing User Data Across the Garmin Marine Network	21
Deleting All Saved Waypoints, Routes, and Tracks	21
Sailing Features	21
Setting the Vessel Type	21
Sail Racing	21
Starting Line Guidance	21
Setting the Starting Line	21
Using the Starting Line Guidance	21
Starting the Race Timer	21
Stopping the Race Timer	21
Setting the Distance between the Bow and the GPS Antenna	21
Laylines Settings	21
Setting the Keel Offset	22
Sailboat Autopilot Operation	22
Wind Hold	22
Setting the Wind Hold Type	22
Engaging Wind Hold	22
Engaging Wind Hold from Heading Hold	22
Adjusting the Wind Hold Angle with the Autopilot	22
Tack and Gybe	22
Tacking and Gybing from Heading Hold	22
Tacking and Gybing from Wind Hold	22
Setting a Tack and Gybe Delay	22
Enabling the Gybe Inhibitor	22
Sonar	22
Sonar Views	22
Traditional Sonar View	23
DownVü Sonar View	23
SideVü Sonar View	23
SideVü/DownVü Scanning Technology	23
Split-Zoom Sonar View	23
Split-Frequency Sonar View	23
Panoptix Sonar Views	23
LiveVü Down Sonar View	23
LiveVü Forward Sonar View	24
RealVü 3D Forward Sonar View	24
RealVü 3D Down Sonar View	24
RealVü 3D Historical Sonar View	24
Changing the Sonar View	24
Selecting the Transducer Type	24
Calibrating the Compass	24
Creating a Waypoint on the Sonar Screen	24
Measuring Distance on the Sonar Screen	25
Pausing the Sonar Display	25
Viewing Sonar History	25
Sonar Sharing	25
Selecting a Sonar Source	25
Renaming a Sonar Source	25
Adjusting the Level of Detail	25
Adjusting the Color Intensity	25
Adjusting the Range of the Depth or Width Scale	25
Setting the Zoom Level on the Sonar Screen	26
Setting the Scroll Speed	26
Sonar Frequencies	26
Selecting Frequencies	26
Creating a Frequency Preset	26
Customizing the Panoptix Sonar Views	26
Adjusting the Appearance of the LiveVü Sonar Views	26
Setting the LiveVü Transducer Transmit Angle	26
Adjusting the RealVü Viewing Angle and Zoom Level	26
Adjusting the Appearance of the RealVü Sonar Views	27
Adjusting the RealVü Sweep Speed	27
Turning On the A-Scope	27
Selecting the Transducer Type	27
Sonar Setup	27
Sonar Settings	27
RealVü Sonar Settings	27
LiveVü Sonar Settings	27
Sonar Noise Rejection Settings	27
Sonar Appearance Settings	28
Sonar Alarm Settings	28
Advanced Sonar Settings	28
Transducer Installation Settings	28
Sonar Recordings	29
Recording the Sonar Display	29
Stopping the Sonar Recording	29
Deleting a Sonar Recording	29
Playing Sonar Recordings	29
Radar	29
Radar Display Modes	29
Changing the Radar Mode	29
Transmitting Radar Signals	29
Adjusting the Radar Range	29
Tips for Selecting a Radar Range	29
Zooming In and Out of the Radar Screen	30
Marking a Waypoint on the Radar Screen	30
Sentry Mode	30
Enabling Timed Transmit	30
Setting the Standby and Transmit Times	30
Enabling a Guard Zone	30
Defining a Circular Guard Zone	30
Defining a Partial Guard Zone	30
Radar Targeting and MARPA	30
MARPA Targeting Symbols	30
Assigning a MARPA Tag to an Object	30
Viewing Information about a MARPA-tagged Object	30
Removing a MARPA Tag from a Targeted Object	30
Viewing a List of AIS and MARPA Threats	30
Showing AIS Vessels on the Radar Screen	30
VRM and EBL	31
Showing the VRM and the EBL	31
Adjusting the VRM and the EBL	31
Measuring the Range and Bearing to a Target Object	31
Radar Overlay	31
Radar Overlay and Chart Data Alignment	31
Showing the Radar Overlay	31
Setting a Custom Park Position	31
Enabling and Adjusting a Radar No Transmit Zone	31
Stopping the Transmission of Radar Signals	31
Optimizing the Radar Display	31
Radar Gain and Clutter	32
Adjusting Gain on the Radar Screen Automatically	32
Adjusting Gain on the Radar Screen Manually	32
Minimizing Nearby Large-Object Interference	32
Minimizing Side-Lobe Interference on the Radar Screen	32
Adjusting Sea Clutter on the Radar Screen Automatically	32
Adjusting Sea Clutter on the Radar Screen Manually	32
Adjusting Rain Clutter on the Radar Screen	32
Reducing Cross Talk Clutter on the Radar Screen	33
Echo Trails	33
Turning on Echo Trails	33
Adjusting the Length of the Echo Trails	33
Clearing the Echo Trails	33
Radar Display Settings	33
Radar Appearance Settings	33
Front-of-Boat Offset	33
Measuring the Potential Front-of-Boat Offset	33
Setting the Front-of-Boat Offset	33
Selecting a Different Radar Source	33
Autopilot	33
Opening the Autopilot Screen	33
Autopilot Screen	34
Adjusting the Step Steering Increment	34
Setting the Power Saver	34
Enabling Shadow Drive™‎	34
Engaging the Autopilot	34
Adjusting the Heading with the Helm	34
Adjusting the Heading with the Chartplotter in Step Steering Mode	34
Steering Patterns	34
Following the U-Turn Pattern	34
Setting Up and Following the Circles Pattern	34
Setting Up and Following the Zigzag Pattern	34
Following the Williamson Turn Pattern	34
Following an Orbit Pattern	34
Setting Up and Following the Cloverleaf Pattern	34
Setting Up and Following a Search Pattern	35
Cancelling a Steering Pattern	35
Digital Selective Calling	35
Networked Chartplotter and VHF Radio Functionality	35
Turning On DSC	35
DSC List	35
Viewing the DSC List	35
Adding a DSC Contact	35
Incoming Distress Calls	35
Navigating to a Vessel in Distress	35
Man-Overboard Distress Calls Initiated from a VHF Radio	35
Man-Overboard and SOS Distress Calls Initiated from the Chartplotter	35
Position Tracking	35
Viewing a Position Report	35
Navigating to a Tracked Vessel	36
Creating a Waypoint at the Position of a Tracked Vessel	36
Editing Information in a Position Report	36
Deleting a Position-Report Call	36
Viewing Vessel Trails on the Chart	36
Individual Routine Calls	36
Selecting a DSC Channel	36
Making an Individual Routine Call	36
Making an Individual Routine Call to an AIS Target	36
Gauges and Graphs	36
Viewing the Gauges	36
Changing the Data Shown in a Gauge	36
Customizing the Gauges	36
Customizing Engine Gauge and Fuel Gauge Limits	36
Viewing Engine and Fuel Gauges	37
Selecting the Number of Engines Shown in Gauges	37
Customizing the Engines Shown in Gauges	37
Enabling Status Alarms for Engine Gauges	37
Enabling Some Engine Gauge Status Alarms	37
Setting the Fuel Alarm	37
Setting the Fuel Capacity of the Vessel	37
Synchronizing the Fuel Data with the Actual Vessel Fuel	37
Viewing the Wind Gauges	37
Configuring the Sailing Wind Gauge	37
Configuring the Speed Source	37
Configuring the Heading Source of the Wind Gauge	37
Customizing the Close-Hauled Wind Gauge	37
Viewing Trip Gauges	38
Resetting Trip Gauges	38
Viewing Graphs	38
Setting the Graph Range and Time Scales	38
Tide, Current, and Celestial Information	38
Tide Station Information	38
Current Station Information	38
Celestial Information	38
Viewing Tide Station, Current Station, or Celestial Information for a Different Date	38
Viewing Information for a Different Tide or Current Station	38
Viewing Almanac Information from the Navigation Chart	38
Warning Manager	38
Viewing Messages	38
Sorting and Filtering Messages	38
Saving Messages to a Memory Card	38
Clearing all of the Messages	38
Media Player	38
Opening the Media Player	39
Icons	39
Selecting the Media Source	39
Playing Music	39
Browsing for Music	39
Enabling Alphabetical Search	39
Setting a Song to Repeat	39
Setting All Songs to Repeat	39
Setting Songs to Shuffle	39
Listening to the Radio	39
Saving a Channel as a Preset	39
Removing a Channel Preset	39
Changing the Tuning Mode	39
Setting the Tuner Region	39
Opening the MTP Source	39
Adjusting the Volume	39
Enabling and Disabling Zones	39
Muting the Media Volume	39
Scanning VHF Channels	39
Adjusting the VHF Squelch	39
SiriusXM®‎ Satellite Radio	39
Locating a SiriusXM Radio ID	39
Activating a SiriusXM Subscription	40
Customizing the Channel Guide	40
Saving a SiriusXM Channel to the Presets List	40
Unlocking SiriusXM Parental Controls	40
Setting Parental Controls on SiriusXM Radio Channels	40
Changing a Parental Passcode on a SiriusXM Radio	40
Restoring Default Parental Control Settings Values	40
Clearing All Locked Channels on a SiriusXM Radio	40
Setting the Device Name	40
SiriusXM Weather	40
SiriusXM Equipment and Subscription Requirements	40
Weather Data Broadcasts	40
Changing the Weather Chart	41
Viewing Precipitation Information	41
Precipitation Views	41
Storm Cell and Lightning Information	41
Hurricane Information	41
Weather Warnings and Weather Bulletins	41
Forecast Information	41
Viewing Forecast Information for Another Time Period	41
Weather Fronts and Pressure Centers	41
Viewing a Marine Forecast or an Offshore Forecast	41
City Forecasts	41
Viewing Sea Conditions	42
Surface Winds	42
Wave Height, Wave Period, and Wave Direction	42
Viewing Forecast Sea Conditions Information for Another Time Period	42
Viewing Fishing Information	42
Surface Pressure and Water Temperature Data	42
Forecasting Fish Locations	42
Changing the Sea Surface Temperature Color Range	42
Visibility Information	42
Viewing Forecast Visibility Information for Another Time Period	42
Viewing Buoy Reports	42
Viewing Local Weather Information near a Buoy	42
Creating a Waypoint on a Weather Chart	43
Weather Overlay	43
Turning On the Weather Overlay on a Chart	43
Weather Overlay Settings on the Navigation Chart	43
Weather Overlay Settings on the Fishing Chart	43
Viewing Weather Subscription Information	43
Viewing Video	43
Selecting a Video Source	43
Alternating Among Multiple Video Sources	43
Networked Video Devices	43
Using Video Presets on Networked Video Cameras	43
Saving Video Presets on a Networked Video Camera	43
Naming Video Presets on a Networked Video Camera	43
Activating Video Presets on a Networked Video Camera	43
Camera Settings	43
Video Settings	44
Associating the Camera to a Video Source	44
Video Camera Movement Control	44
Controlling Video Cameras Using On-Screen Controls	44
Controlling a Video Camera Using Gestures	44
Creating a Combination with Video Functions	44
Configuring the Video Appearance	44
Configuring the PC Display	44
Exiting PC Display Mode	44
Controlling the VIRB®‎ X/XE Action Camera with the Chartplotter	45
VIRB X/XE Action Camera Settings	45
VIRB X/XE Action Camera Video Setup Settings	45
Adding the VIRB X/XE Action Camera Controls to Other Screens	45
Device Configuration	45
Turning On the Chartplotter Automatically	45
System Settings	45
Station Settings	45
Viewing System Software Information	45
Viewing the Event Log	45
Preferences Settings	45
Units Settings	46
Navigation Settings	46
Auto Guidance Line Configurations	46
Adjusting the Distance from Shore	46
Communications Settings	47
NMEA 0183 Settings	47
Configuring NMEA 0183 Output Sentences	47
Setting the Communication Format for Each NMEA 0183 Port	47
NMEA 2000 Settings	47
Garmin Marine Network	47
Setting Alarms	47
Navigation Alarms	47
Setting the Anchor Drag Alarm	47
System Alarms	47
Sonar Alarm Settings	47
Setting Weather Alarms	47
Setting the Fuel Alarm	47
My Vessel Settings	48
Setting the Keel Offset	48
Setting the Water Temperature Offset	48
Calibrating a Water Speed Device	48
Other Vessels Settings	48
Restoring the Original Chartplotter Factory Settings	49
Communication with Wireless Devices	49
Setting Up the Wi‑Fi®‎ Wireless Network	49
Connecting a Wireless Device to the Chartplotter	49
Changing the Wireless Channel	49
Changing the Wi‑Fi Host	49
Wireless Remote Control	49
Pairing the Wireless Remote Control With the Chartplotter	49
Turning On and Off the Remote Backlight	49
Disconnecting the Remote from All Chartplotters	49
Using the Garmin Helm Application with the Chartplotter	49
Chartplotter Data Management	49
Copying Waypoints, Routes, and Tracks from HomePort to a Chartplotter	49
Selecting a File Type for Third-Party Waypoints and Routes	49
Copying Data from a Memory Card	50
Copying Waypoints, Routes, and Tracks to a Memory Card	50
Copying Built-In Maps to a Memory Card	50
Backing Up Data to a Computer	50
Restoring Backup Data to a Chartplotter	50
Saving System Information to a Memory Card	50
Appendix	50
Registering Your Device	50
Digital Switching	50
Pairing the GRID Remote Input Device with the Chartplotter	50
Pairing the GRID Device with the Chartplotter from the Chartplotter	50
Pairing the GRID Device with the Chartplotter from the GRID Device	50
Rotating the GRID Joystick	50
Cleaning the Screen	50
Viewing Images on a Memory card	51
Screenshots	51
Capturing Screenshots	51
Copying Screenshots to a Computer	51
Troubleshooting	51
My device will not acquire GPS signals	51
My device will not turn on or keeps turning off	51
My device is not creating waypoints in the correct location	51
NMEA 2000 PGN Information	51
NMEA 0183 Information	52
Software License Agreement	52

Match case Limit results 1 per page

•

To view true or apparent wind, select

Wind

, and select an

option.

Viewing Trip Gauges

Trip gauges show information for odometer, speed, time, and

fuel for your present trip.

Select

Info

Trip & Graphs

Trip

Resetting Trip Gauges

Select

Info

Trip & Graphs

Trip

Select an option:

•

To set all the readings for the present trip to zero, select

Reset Trip

•

To set the maximum speed reading to zero, select

Reset

Maximum Speed

•

To set the odometer reading to zero, select

Reset

Odometer

•

To set all the readings to zero, select

Reset All

Viewing Graphs

Before you can view graphs of various environmental changes,

such as temperature, depth, and wind, you must have an

appropriate transducer or sensor connected to the network.

Select

Info

Trip & Graphs

Graphs

Setting the Graph Range and Time Scales

You can indicate the amount of time and the range of depth that

appear in the depth and water temperature graphs.

From a graph, select

Graph Setup

Select an option:

•

To set a time-elapsed scale, select

Duration

. The default

setting is 10 minutes. Increasing the time-elapsed scale

allows you to view variations over a longer period of time.

Decreasing the time-elapsed scale allows you to view

more detail over a shorter period of time.

•

To set the graph scale, select

Scale

. Increasing the scale

allows you to view more variation in readings. Decreasing

the scale allows you to view more detail in the variation.

Tide, Current, and Celestial

Information

Tide Station Information

You can view information about a tide station for a specific date

and time, including the tide height, and when the next high and

low tides will occur. By default, the chartplotter shows tide

information for the most recently viewed tide station and for the

present date and time.

Select

Info

Tides & Currents

Tides

Current Station Information

NOTE:

Current station information is available with certain

detailed maps.

You can view information about a current station for a specific

date and time, including the current speed and level of the

current. By default, the chartplotter shows current information for

the most recently viewed current station and for the present date

and time.

Select

Info

Tides & Currents

Currents

Celestial Information

You can view information about sunrise, sunset, moonrise,

moonset, moon phase, and the approximate sky view location of

the sun and moon. The center of the screen represents the sky

overhead, and the outermost rings represent the horizon. By

default, the chartplotter shows celestial information for the

present date and time.

Select

Info

Tides & Currents

Celestial

Viewing Tide Station, Current Station, or

Celestial Information for a Different Date

Select

Info

Tides & Currents

Select

Tides

Currents

, or

Celestial

Select an option.

•

To view information for a different date, select

Change

Date

Manual

, and enter a date.

•

To view information for today, select

Change Date

Current

•

If available, to view information for the day after the date

shown, select

Next Day

•

If available, to view information for the day before the date

shown, select

Previous Day

Viewing Information for a Different Tide or

Current Station

Select

Info

Tides & Currents

Select

Tides

Currents

Select

Nearby Stations

Select a station.

Viewing Almanac Information from the

Navigation Chart

From a chart or 3D chart view, select a location.

Select

Information

Select

Tides

Currents

, or

Celestial

Warning Manager

Viewing Messages

Select

Info

Warning Manager

Select a message.

Select

Review

Sorting and Filtering Messages

Select

Info

Warning Manager

Sort/Filter

Select an option to sort or filter the message list.

Saving Messages to a Memory Card

Insert a memory card into the card slot.

Select

Info

Warning Manager

Save to Card

Clearing all of the Messages

Select

Info

Warning Manager

Clear Warning Manager

Media Player

NOTE:

The media player feature is not compatible with all

chartplotter models.

If you have a FUSION-Link

™

capable stereo connected to the

NMEA 2000 network, you can control the stereo using the

chartplotter. The chartplotter should automatically detect the

media player when it is first connected.

You can play media from sources connected to the media player

and sources connected to the NMEA 2000 network. Your

Tide, Current, and Celestial Information