Ganz Security ZN-B2MTP-2 ZN-BxMTP Quick Guide
Ganz Security ZN-B2MTP-2 Manual
 |
View all Ganz Security ZN-B2MTP-2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Ganz Security ZN-B2MTP-2 manual content summary:
- Ganz Security ZN-B2MTP-2 | ZN-BxMTP Quick Guide - Page 1
heat sources, such as a television or oven. -Refer to your instruction manual for the operating temperature. -Keep the Network camera away from direct Series (ZN-B2MTP / ZN-B1MTP) User's Manual, Utility software 3 Quick User Guide This document 4 Accessories Template for installation Anchor - Ganz Security ZN-B2MTP-2 | ZN-BxMTP Quick Guide - Page 2
) Audio Out (Line Out) Alarm In (Dry Contact) Alarm Out (Relay out [0.5A:AC125V/1A DC30V]) 4. Micro SD card (SDHC supported) 5. Control Button 6. Video output for service monitor/Status LED 3. Making Connection 1. If you have external devices such as sensor or alarms, make connection from connectors - Ganz Security ZN-B2MTP-2 | ZN-BxMTP Quick Guide - Page 3
Quick User Guide ZN-BxMTP Network Camera 4. Assign IP address The default setting of the camera is set to "DHCP" and "UPnP" function is set to ON. If - Ganz Security ZN-B2MTP-2 | ZN-BxMTP Quick Guide - Page 4
Quick User Guide ZN-BxMTP Network Camera 5. Web browser connection Note : The Network camera supports Internet Explorer 7 or above. Please check version of your browser and connect the network camera. For further information for setup, please refer to User's manual in software CD. Ver1.00 EN 4
-
1 -
2 -
3 -
4
 |
 |
Quick User Guide
ZN-BxMTP Network Camera
Ver1.00 EN
1
Warning before installation
-Power off the Network camera if it is found to be smoking or smells unusual.
-Keep the Network camera away from water.
If the Network camera gets wet,
power off immediately.
-Do not place the Network camera near heat sources, such as a television or
oven.
-Refer to your instruction manual for the operating temperature.
-Keep the Network camera away from direct sunlight.
-Do not place the Network camera in high humidity environments.
-Do not place the Network camera on unsteady surfaces.
-Do not touch the Network camera when there is lightning present.
-Do not disassemble the Network camera.
-Do not drop the Network camera.
-Do not insert any object into the Network camera, such as a screwdriver.
For other safety and regulation information, please refer to “User’s manual”.
1. Check Contents
No. Item
Description
1
Network Camera
ZN-BxMTP Series (ZN-B2MTP / ZN-B1MTP)
2
Software CD
User’s Manual, Utility software
3
Quick User Guide
This document
4
Accessories
Template for installation
Anchor : 4pcs
Tapping Screw 4x30 : 4pcs
Hexalobular L-key Wrench
Wrench bolt 3pcs
Video monitor cable
Power Jack Cable
Terminal Block (2pin/8pin)