Ganz Security PT127XT-IP Manual - Page 59
Erase, Apply Edited Area
View all Ganz Security PT127XT-IP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
G Remote Video Monitoring 5 Remote Video Monitoring 5 Preference Preference in video compression and transmission:With 'Bitrate' selected, the video compression will be effected by the 'Bitrate' value entered.With 'Quality' selected, the video compression will be effected by the quality of image selected. Therefore, 'Bitrate' and 'Quality' corresponds to CBR and VBR respectively Resolution Selectable video compression resolution: 5 NTSC: 720u480, 720u240, 352u480, 352u240 PAL: 720u576, 720u288, 352u576, 352u288 Frame rate Selectable video frame rate: Determine the maximum number of frames of video images to compress. The frame rate of actually transmitted video can be affected by the network bandwidth limitation Quality The selection is possible with Preference is set to 'Quality' Bitrate The value is applicable when Preference is set to 'Bit rate' I-Frame Interval Possible values between 0 and 255. There will be no I-frames if 0 is selected. Motion Detection Configure regions for motion detection. Regions of arbitrary shape can be configured by the following steps. Area Editing ཛGEnable Edit item. ཛྷGSelect editing Mode. Set is for including cells to motion detection region and Erase is for excluding. ཝGSelect cells using the left button of the mouse. Multiple cells can be selected conveniently by press and dragging. ཞGPress Apply Edited Area to save the editing. Sensitivity Brightness Contrast Hue A condition to trigger an event with motion detection. The value determines the sensitivity of the motion detection within a block: the smaller, the more sensitive Controls input video brightness by selecting values between 0 and 100. Controls input video contrast by selecting values between 0 and 100 Controls input video Hue by selecting values between 0 and 100 GSpeed Dome Camera Instruction Manual 59/74