Frigidaire PLEB30M9EC Use and Care Guide - Page 20
Consumer Defined Controls
UPC - 057112090320
View all Frigidaire PLEB30M9EC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Setting Wall Oven Controls Consumer Defined Controls Note: The Consumer Defined Control features are adjustments to the control that will not affect cooking results. These include the Oven Lockout, Silent Control Operation and Temperature Display features. Setting Oven Lockout Feature The Clear /Off pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door and prevents the Oven from being turned on. It does not disable the clock, Kitchen Timer or the interior oven lights. INSTRUCTIONS PRESS DISPLAY To activate the Oven Lockout feature 1. Press and hold Clear /Off for 3 seconds (Figure 1). 2. After 3 seconds "LOC" will appear, a beep will sound and "DOOR LOCKED" will flash in the display. Once the oven door is locked the "DOOR LOCKED" indicator will stop flashing and remain on along with the "LOC". To reactivate normal oven operation: 1. Press and hold Clear /Off for 3 seconds. A beep will sound. "LOC" will disepear and "DOOR LOCKED" will flash in the display until the oven door has completely unlocked (figure 2). Clear /Off for 3 seconds Clear /Off for 3 seconds Figure 1 Figure 2 2. The wall oven is again fully operational. Setting Silent Control Operation The START TIME Start time and CLEAN Clean pads control the Silent Control operation feature. The Silent Control operation feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can be programmed for silent operation and later returned to operating with all the normal sounds and beeps. INSTRUCTIONS PRESS DISPLAY To change control from normal sound operation to silent control operation 1. To tell if your range is set for normal or silent operation press and hold Start time . "0:00" will appear and "DELAY" will flash in the display Start time (Figure 3). After 7 seconds ":SP" will appear in the display (Figure 4). Figure 3 2. Press Clean to switch between normal sound operation and silent Clean operation mode. The display will show either ":SP" (Figure 4) or ":--" (Figure 5). If ":SP" appears (Figure 4), the control will operate with normal sounds and beeps. If ":- -" appears (Figure 5), the control is in the silent operation mode. Figure 4 Figure 5 3. Press START to accept the change or press Clear /Off to reject the change. START or Clear /Off 20