Frigidaire FRS123LS1 Installation Instructions (All Languages) - Page 16

Connect the cable to the outdoor unit 1. Remove the electrical control board cover from the outdoor unit by loosening the screw. 2. Connect the connective cables to the terminals as identified with their respective matched numbers on the terminal block of indoor and outdoor units. The connective cable to power supply shall be approved polychloroprene sheathed flexible cord, type designation 14AWG or heavier cord. 3. Secure the cable onto the control board with the cord clamp. 4. To prevent the ingress of water, form a loop of the connective cable as illustrated in the installation diagram of indoor and outdoor units. 5. Insulate unused cords (conductors) with PVC-tape. Process them so they could not touch any electrical or metal parts. Cover Screw < 12000 btu's CABLE (Heating and cooling model) "Cable D" or "Cable E" Code wire Code wire 1.57" 0.39" 1.57" 0.39" < 12000 btu's CABLE (Cooling model) Code wire 0.39" 1.57" > 12000 btu's CABLE (Heating and cooling model) "Cable F" Code wire 1.57" 0.39" 21 Electrical work