Frigidaire FRA08EZT1 Installation Instructions (All Languages) - Page 1

Installation Instructions READ BEFORE INSTALLING UNIT For SLO3 Air Conditoner (8K~12K BTU) To avoid risk of personal injury, property damage, or product damage due to the weight of this device and sharp edges that may be exposed: Air conditioners covered in this manual pose an excessive weight hazard. Two or more people are needed to move and install the unit. To prevent injury or strain, use proper lifting and carrying techniques when moving unit. Carefully inspect location where air conditioner will be installed. Be sure it will support the weight of the unit over an extended period of time. Handle air conditioner with care. Wear protective gloves whenever lifting or carrying the unit. AVOID the sharp metal fins of front and rear coils. Make sure air conditioner does not fall during installation. Tools and Parts: Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here. TOOLS NEEDED Flat-blade and Phillips screwdrivers Tape measure Level 'ULOODQG RUVPDOOHUGULOOELW Through-the-wall Installation: In addition to the tools listed above, the following tools are needed for through-the-wall installation. TOOLS NEEDED saw caulk ;ƎZRRGVFUHZV ƎFP RUWKLFNHUOXPEHU Parts Supplied: Check that all parts are included in parts package: Hardware Qty. ;Ǝpan - head Phillips screws 3 ;Ǝround - head screws  ;Ǝpan - head Phillips screws  Hardware Qty. Top channel 1 Window sash seal 1 Foam seal 1 window lock bracket 1 side curtains 2 Safety Lock 2 (for Vinyl-Clad window) weather seals  $ 1