Frigidaire FPRU19F8RF Complete Owner's Guide - Page 6

INSTALLATION Door Handle Mounting Instructions 1. Remove handle from carton and any other protective packaging. 2. Position refrigerator handle end caps over upper and lower pre-installed shoulder bolts (A) that are fastened into door, ensuring the holes for the set screws are facing towards the outside of door if a single unit installation or the freezer door (if installing the matching freezer). 3. While holding handle firmly against door, fasten upper and lower Allen set screws (B) with supplied Allen wrench. 4. Repeat steps 2 and 3 to install freezer handle (if installing the matching freezer). Ensure the holes for the set screws are facing towards the refrigerator door. Frigidaire Gallery® Frigidaire Professional® A A B B Single Unit Installation Ensure Handle Set Screws are Facing Ensure Handle Set ScrewEascharOethFear cwiinthgDoEonrss uCrloeseHda. ndle Set Screws are Facing Each Other with MDaotochrsingCRloesfreigderator and FEreaeczherODtohoerr with Doors Closed. Handle Installation  NOTE All set screws should be tightened and sub-flush (Allen set screw should be seated just below the surface of the end cap) of handle end cap. The end caps should be drawn tight to refrigerator door with no gaps. 6