Frigidaire FHWW124WD1 Complete Owners Guide - Page 13

13 OPERATING INSTRUCTIONS PUREAIRTM FILTER(sold separately): This unit has available space for use of PureAirTM Filters(sold separately). There are different types of PureAirTM Filters, which are sold separately. You can purchase PureAirTM Filters by scanning QR code behind the air inlet grille or by visiting Frigidaire.com or by calling the Frigidaire Customer Service Center 1-800-944-9044(US) / 1-800-265-8352 (Canada). PUREAIRTM FILTER INDICATOR: White light SLEEP FEATURE: DO THIS: PRESS SLEEP BUTTON YOU WILL SEE: Note: If the PureAirTM filter is installed the PureAirTM Filter indicator will glow white. RESET PUREAIRTM FILTER LIGHT: Red light DO THIS: HOLD SLEEP BUTTON 3 SECONDS After 1440 hours of operation the PureAirTM Filter indicator will turn red. To reset, replace with new PureAirTM Filter, then hold the "Sleep" button 3 for seconds. DIMMING DISPLAY: Note: The display will show SL for 3 secs. The display and indicator lights will turn down 25%. In this mode, the unit will select Auto fan speed automatically, and the selected temperature will increase by 2 °F 30 minutes after the mode is selected. The temperature will then increase by another 2 °F after an additional 30 minutes. This new temperature will be maintained for 7 hours before it returns to the originally selected temperature. This ends the "Sleep" mode and the unit will continue to operate as originally programmed. The "Sleep" mode program can be cancelled at any time during operation by pressing the "Sleep" again, "Fan speed" or "Mode" button. After 60 seconds of control inactivity the display and indicator lights will turn off. Press any button on the control panel or remote control and the display will resume. Please note that if the unit is in Eco mode and the set temperature has been reached the unit may appear off. However, the unit is on and will continue to sample the air every 10 minutes. To confirm, press any button on the control panel or remote control to illuminate the display to show unit in Eco mode.