Frigidaire FHWW104WD1 Complete Owners Guide - Page 10

10 OPERATING INSTRUCTIONS NOTE The following instructions represent the touch pad. The same instructions can be used for the remote control. TO TURN UNIT ON: DO THIS: PRESS ON/OFF BUTTON YOU WILL SEE: YOU WILL SEE: Note: The display will show the set temperature during normal operation, press either up ( + ) or down ( - ) button to adjust the set temperature to the desired setting. The unit will beep twice if the temperature up ( + ) or down ( - ) button is pressed continuously when the set temperature reaches the upper/lower limits 90°F or 60°F. TO ADJUST FAN SPEEDS: NOTE: The unit will run in Eco(energy saver) mode when powered on each time, if last shutdown is in cool or Eco(energy saver) mode. In this mode, the fan will continue to run for 3 minutes after compressor shuts off. The fan then cycles on for 120 seconds at 10 minutes intervals until the room temperature is above the set temperature, at which time the compressor turns back on. DO THIS: PRESS TO SELECT YOU WILL SEE: TO CHANGE TEMPERATURE SETTING: TO USE AUTO FAN FEATURE: DO THIS: PRESS TO RAISE PRESS TO LOWER DO THIS: PRESS FAN BUTTON, CHOOSE AUTO