Frigidaire FHWC083WAB Complete Owners Guide - Page 11

YOU WILL SEE: 11 OPERATING INSTRUCTIONS SLEEP FEATURE: Note: Use this function only when cooling is not desired, such as for room air circulation or to exhaust stale air on some models. (Remember to open the vent during this function, but keep it closed during cooling for maximum cooling e ciency.) You can choose any fan speed you prefer. During this function, the display will show the actual room temperature, not the set temperature as in the cooling mode. DRY MODE: DO THIS: PRESS SLEEP BUTTON YOU WILL SEE: DO THIS: PRESS MODE BUTTON CHOOSE DRY YOU WILL SEE: Note: In this mode, the unit will select Auto fan speed automatically, and the selected temperature will increase by 2 °F 30 minutes after the mode is selected. The temperature will then increase by another 2 °F after an additional 30 minutes. This new temperature will be maintained for 7 hours before it returns to the originally selected temperature. This ends the "Sleep" mode and the unit will continue to operate as originally programmed. The "Sleep" mode program can be cancelled at any time during operation by again pressing the "Sleep", "Fan speed" or "Mode" button. CHECK FILTER FEATURE, YOU WILL SEE: Note: In this mode, the air conditioner will work like a dehumidifier, but it will cool the room down meanwhile. The temperature can be adjusted between 62 °F (17 °C) and 86 °F (30 °C) and fan speed will be held at "Lo". Note: This feature is a reminder to clean the Air Filter (See Care and Cleaning) for more e cient operation. The LED (light) will illuminate after 250 hours of operation. To reset after cleaning the filter, press the "Filter Reset" button and the light will go o .