Frigidaire FHTE083WA1 Installation Instructions - Page 3
New Dual Intake Grille
View all Frigidaire FHTE083WA1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Installation Instructions IMPORTANT This units increased performance characteristics is the result of having two rear intakes. It is very important that these installation instructions are followed so your unit can operate at maximum efficiency. If there is an existing sleeve and rear grille, it should be replaced with the one shipped with the unit in the accessory kit. Existing Frigidaire sleeves may have older single sided intake grilles • These grilles should be replaced with the dual intake grille supplied with the air conditioner. Left Intake Grille Right Intake Grille 1. Remove the existing grille and save the mounting screws. 2. Place the grille included with your new air conditioner towards the inside rear of the sleeve. 3. Attach the new grille by aligning the four mounting holes. 4. Re-insert the self-tapping screws into the nylon retainers. New Dual Intake Grille Left Intake Right Intake 3