Frigidaire FHTC083WA1 Complete Owners Guide - Page 9

OPERATING INSTRUCTIONS 9 NOTE The following instructions represent the touch pad. The same instructions can be used for the remote control. TO TURN UNIT ON: YOU WILL SEE: Note: This mode is a fixed combination of Cool mode and Auto fan speed setting. In this mode, the fan speed can not be selected manually. COOL FEATURE: DO THIS: PRESS ON/OFF BUTTON YOU WILL SEE: DO THIS: PRESS MODE BUTTON CHOOSE COOL NOTE: The unit will run in Cool mode with Eco feature and Auto fan speed setting when used for the first time. With the Eco feature, when the room temperature is below the set temperature, the fan will continue to run for 3 minutes after the compressor shuts o . The fan then cycles on for 2 minutes at 10 minute intervals until the room temperature is above the set temperature, at which time the compressor turns back on. Eco feature can be activated or deactivated by pressing Eco button, but it is invalid in fan only mode. AUTO FEATURE: YOU WILL SEE: Note: In this mode, the fan remains on all the time with the compressor cycling on and o when room temperature is reached. TO CHANGE TEMPERATURE SETTlNG: DO THIS: PRESS MODE BUTTON CHOOSE AUTO DO THIS: PRESS TO RAISE PRESS TO LOWER