Frigidaire FHPW142AC1 Complete Owners Guide - Page 10

10 INSTALLATION INSTRUCTIONS 1. Extend either side of the hose(Fig.1). Extend the side of hose Fig.1A 2. Install the connector B into the unit (Fig.2). The hose can be extended from its original length of 15" up to 59", but try to maintain the minimum required length. Also make sure that the hose does not have any sharp bends or sags.(Fig.5) Fig.5 2 Lock 1 Slide onto Fig.2 3. A x the connector A into the window slider kit and seal.(Fig.3&4) Vertical window Window Slider Kit Minimum:26.6(67.5cm) Maxmum:52.5(133cm) Fig.3 Horizontal window Installation in a double-hung sash window 1.Cut the adhesive foam seals (A) to the proper lengths and attach them to the window and sill.(Fig.6) Foam seal A (adhesive type) Fig.6 2.Open the window sash and place the window slider kit on the window sill (Fig.7). Attach the window slider kit to the window sill. Adjust the length of the window slider kit according to the width of window. Screw down the two screws on the window slider kit. See Fig.7. Cut the adjustable window slider kit if the width of window is less than 26.6 inches(Fig.8). screws Window Slider Kit Minimum:26.6(67.5cm) Maxmum:52.5(133cm) Fig.4 Window slider kit 26.6"~52.5" window sill Fig.7