Frigidaire FFRA102WA1 Complete Owners Guide - Page 7

Air Conditioner Features (continued) TO USE AUTO COOL FEATURE: DO THIS: PRESS AUTO COOL YOU WILL SEE: LIGHT On Note: Fan speed starts at HI and adjusts to a slower speed as the room temperature dictates.For example if the room doesn't get too warm it will stay at the slowest speed. If the room temperature rises quickly, such as a door being opened, it will automatically go to the highest speed. The fan speeds will readjust back to the slowest speed as the room returns to the original set temperature.Press either the fan slower or fan faster button to adjust the fan speed manually. TO OPERATE ON FAN ONLY: DO THIS: PRESS MODE BUTTON CHOOSE FAN ONLY YOU WILL SEE: LIGHT On Note: Use this function only when cooling is not desired, such as for room air circulation or to exhaust stale air. (Remember to open the vent during this function, but keep it closed during cooling for maximum cooling efficiency.) You can choose any fan speed you prefer. During this function, the display will show the actual room temperature, not the set temperature as in the cooling mode. TO USE THE ENERGY SAVER FEATURE: DO THIS: PRESS MODE BUTTON CHOOSE ENERGY SAVER YOU WILL SEE: LIGHT On Note: In this mode, the fan will continue to run for 3 minutes after the compressor shuts off. The fan then cycles on for 2 minutes at 10 minute intervals until the room temperature is above the set temperature, at which time the unit turns back on. 7