Frigidaire FFHP362ZQ2 Complete Owners Guide - Page 14

How the air conditioner works Automatic operation When the Air Conditioner is ready for use, switch on the power and the OPERATION indicator lamp on the display panel of the indoor unit starts illuminating. 1. Use the MODE button to select AUTO. 2. Use the "MODE" button to select Auto. The unit will automatically select Cool, Fan and Heat operation depending on the difference ambient temperature and system difference temperature. When in Cool Operation the panel will display 77 oF. In Fan Operation the panel will display 77 oF. In Heat Operation the panel will display 68 oF. 3. Press the ON/OFF button again to stop the unit operation. Attention!! 1. When you set the air conditioner in AUTO mode, it will automatically select cooling, heating (only for models with heating function) or fan only operation depending on the room temperature. 2. If the AUTO mode is uncomfortable, you can select desired conditions manually. COOL / HEAT and FAN ONLY operation 1. If the AUTO mode is not comfortable, you may manually override the settings by using COOL, HEAT* or FAN ONLY** mode. 2. Press the "+"/"-" button to set the desired room temperature. When in COOL mode, the most comfortable settings are 70 ºF or above. When in HEAT mode, the most comfortable settings are 82 ºF or below. 3. Press the FAN to select the FAN mode of AUTO, , or . 4. Press the ON/OFF button, the operation lamp lights and the air conditioner start to operate as your settings. Press the ON/OFF button again to stop this unit operation. * Note: Only for models with heating function. **Note: The FAN ONLY mode can not be used to control the temperature. While in this mode, only steps 1,3 and 4 may be performed. 13 How the air conditioner works