Frigidaire FFGW2425QB Complete Owner s Guide - Page 16

Starting The Select Self-clean, Cycle

Get Frigidaire FFGW2425QB PDF manuals and user guides View all Frigidaire FFGW2425QB manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

Setting OVEN controls Starting the Select Self-Clean Cycle NOTE: The kitchen area should be well ventilated using an open window, ventilation fan or exhaust hood during the 1st Self-Clean cycle. This will help eliminate the normal odors associated with the 1st Self-Clean cycle. To Set the Controls for a Self-Clean Cycle: 1. Be sure the clock shows the correct time of day. 2. Press Clean. "- - -" appears in the display. 3. Press the until "3:00" or "4:00" appears in the display for a 3 hour cycle or 4 hour cycle, or press until "2:00" appears in the display for a 2 hour cycle. 4. As soon as or is released, "CLn" appears in the display. 5. As soon as the controls are set, the motor driven lock will begin to close automatically and the "Door Locked" indicator light will flash. DO NOT open the oven door while the light is flashing (it takes about 15 seconds for the oven door to lock). 6. The "LOCK" light will glow until the Self-Cleaning cycle is complete or cancelled and the oven temperature has cooled. When the Self-Clean Cycle is Completed: 1. The time of day or "End" will appear in the display window and the "Clean" and "LOCK" light will continue to glow. 2. Once the oven has cooled down for about 1 HOUR and the "LOCK" light has gone out, the oven door can be opened. 3. If "End" is in the display and the Select Clean indicator light remains ON, press clear off. The time of day will appear in the display. NOTE: When the oven is cool, wipe away any residue or powdered ash with a damp cloth or paper towel. Stopping or Interrupting a Select Self-Cleaning Cycle If it becomes necessary to stop or interrupt a SelfCleaning cycle: 1. Press clear off. 2. Once the oven has cooled down for about 1 HOUR and the "LOCK" light has gone out, the oven door can be opened. 3. Restart the Self-Clean cycle once all conditions have been corrected. CAUTION To avoid possible burns use care when opening the oven door after the Self-Cleaning cycle. Stand to the side of the oven when opening the door to allow hot air or steam to escape.. CAUTION DO NOT force the oven door open. This can damage the automatic door locking system. Use caution and avoid possible burns when opening the door after the Self-Cleaning cycle has completed. The oven may still be VERY HOT. 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
16
STARTING THE SELECT SELF-CLEAN
CYCLE
NOTE
: The kitchen area should be well ventilated using
an open window, ventilation fan or exhaust hood during
the 1st Self-Clean cycle. This will help eliminate the
normal odors associated with the 1st Self-Clean cycle.
To Set the Controls for a Self-Clean Cycle:
1.
Be sure the clock shows the correct time of day.
2. Press
CLEAN.
"— — —" appears in the display.
3. Press the
until "3:00" or "4:00" appears in the
display for a 3 hour cycle or 4 hour cycle, or press
until "2:00" appears in the display for a 2 hour cycle.
4. As soon as
or
is released, "CLn" appears in the
display.
5.
As soon as the controls are set, the motor driven
lock will begin to close automatically and the "Door
Locked" indicator light will flash.
DO NOT
open the
oven door while the light is flashing (it takes about
15 seconds for the oven door to lock).
6.
The "LOCK" light will glow until the Self-Cleaning
cycle is complete or cancelled and the oven
temperature has cooled.
When the Self-Clean Cycle is Completed:
1.
The time of day or "
End
" will appear in the display
window and the "Clean" and "LOCK" light will
continue to glow.
2.
Once the oven has cooled down for about 1 HOUR
and the "LOCK" light has gone out, the oven door
can be opened.
3. If "
End
" is in the display and the Select Clean
indicator light remains ON, press
CLEAR OFF
. The
time of day will appear in the display.
NOTE:
When the oven is cool, wipe away any residue or
powdered ash with a damp cloth or paper towel.
Stopping or Interrupting a Select Self-Cleaning
Cycle
If it becomes necessary to stop or interrupt a Self-
Cleaning cycle:
1. Press
CLEAR OFF
.
2.
Once the oven has cooled down for about 1 HOUR
and the "LOCK" light has gone out, the oven door
can be opened.
3.
Restart the Self-Clean cycle once all conditions have
been corrected.
SETTING OVEN CONTROLS
CAUTION
To avoid possible burns use care when opening the oven
door after the Self-Cleaning cycle. Stand to the side of
the oven when opening the door to allow hot air or steam
to escape..
CAUTION
DO NOT
force the oven door open. This can damage
the automatic door locking system. Use caution and
avoid possible burns when opening the door after the
Self-Cleaning cycle has completed. The oven may still
be VERY HOT.