Frigidaire FFEW2426UB Complete Owners Guide - Page 11
Warning, Important, Caution
View all Frigidaire FFEW2426UB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
BEFORE SETTING OVEN CONTROLS Oven Vent Location Oven Racks The oven vent is located just below the control panel (See Figure 1). When the oven is on, warm air passes through this vent. This venting is necessary for proper air circulation in the oven and good baking results. Do not block the oven vent. Steam or moisture may appear near the oven vent. This is normal. Flat oven racks may be used for most cooking needs and may be placed in most oven rack positions. . flat oven rack flat handle oven rack Figure 1: Oven vent location WARNING Protective liners - Do not use aluminum foil or any other materials to line the oven bottom or any other part of the oven including oven racks. Only use aluminum foil as recommended in this manual. Improper installation of these liners may result in risk of electric shock or fire. IMPORTANT • Remove all racks and accessories from the oven before cleaning. • Do not line oven walls, racks, bottom, or any other range parts with aluminum foil. Doing so will alter heat distribution, produce poor baking results, and may cause permanent damage to the oven interior. Figure 2: Oven rack types Removing, Replacing, and Arranging Oven Racks To arrange - Always arrange the oven racks when the oven is cool (prior to operating the oven). To remove - Pull the oven rack straight forward until it reaches the stop position. Lift up front of oven rack slightly and slide out. To replace - Place the oven rack on the rack guides on both sides of oven walls. Tilt the front of oven rack upward slightly and slide the oven rack back into place. Be sure oven racks are level before using. CAUTION Always use pot holders or oven mitts when using the oven. When cooking, the oven interior, exterior, and oven racks become very hot which can cause burns. 11