Foxconn M61PML-K English Manual - Page 42
PC Health Status
View all Foxconn M61PML-K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
PC Health Status CMOS Setup Utility - Copyright (C) 1985-2011, American Megatrends, Inc. PC Health Status Case Open Warning CPU Warning Temperature CPU Shutdown Temperature CPU Temperature System Temperature CPU Fan Speed System Fan Speed CPU Core VTT(V) +3.3V +5.0V +12.0V 5VSB (V) CPU Smart Fan Function System Smart Fan Function [Disabled] Help Item [Disabled] [Disabled] Options :40 oC/104 oF :31 oC/87 oF Disabled :2184 RPM Enabled :N/A Reset :1.232 V :1.488 V :3.424 V :5.107 V :11.968 V :5.080 V [Disabled] [Disabled] 3 Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help F9:Optimized Defaults ► Case Open Warning This item is used to enable or disable case open warning function. ► CPU Warning Temperature This option is used to set the warning temperature for the system. When the temperature of CPU is higher than the set value, the motherboard will send out warning information. ► CPU Shutdown Temperature This item is used to set the system temperature upper limit. When the temperature exceeds the set value, the system will shut down automatically. This function works only when your operating system is supporting ACPI. ► CPU Temperature/System Temperature The CPU/System temperature are automatically detected and displayed by the system. ► CPU Fan/System Fan Speed The CPU fan/System fan speed are automatically detected and displayed by the system. ► CPU Core/VTT(V)/+ 3.3V/+5.0V/+12.0V/5VSB The current voltages are automatically detected and displayed by the system. ► CPU Smart Fan Function / System Smart Fan Function This option is used to enable or disable smart fan function. Set "CPU Smart Fan Function"/"System Smart Fan Function", the following items will appear: ► Off PWM Temperature This item is used to set a off limit of temperature. The fan will stop when the temperature is lower than the off limit. You can input a value from 0 to 127, or change it by pressing / key. ► Start PWM Temperature 35