Foxconn H61MD-V User manual - Page 23
Serial ATA Connectors: SATA_1/2/3/4, Fan Headers: CPU_FAN, SYS_FAN
View all Foxconn H61MD-V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
HARDWARE INSTALLATION Serial ATA Connectors: SATA_1/2/3/4 The Serial ATA connector is used to connect with SATA Hard Disk or CD devices which support this feature. The SATA_1/2/3/4 allows up to 3GB/s data transfer rate. Fan Headers: CPU_FAN, SYS_FAN The fan speed can be controlled and monitored in the BIOS Setup. These fans can be automatically turned off after the system enters S3, S4 and S5 sleeping states. 1 GND POWER SENSE CONTROL CPU_FAN/SYS_FAN Chassis Intrusion Alarm Header : INTR The connector can be connected to a security switch on the chassis. The system can detect the chassis intrusion through the function of this connector. If eventually the chassis is closed, the system will send a message out. INTRUDERJ 1 GND INTR USB 2.0 Headers: F_USB1/2 These connectors comply with USB 2.0 specification, you can get USB ports by connecting the USB module cable to any of these connectors. 16 1 GND TX+ TXGND RXRX+ GND SATA_1/2/3/4 VCC DD+ GND EMPTY 12 9 10 VCC DD+ GND NC F_USB1/2