Fisher and Paykel DG70FA1 Dryers DE70FA* & DG70FA* User Guide (English, Sp - Page 37
Beginning Drying Cycle, Stopping Your Dryer, Changing Cycles During Operation, ²0. Fabric Softener
View all Fisher and Paykel DG70FA1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Using Your Dryer US CA 7. Beginning Drying Cycle Once you have chosen all your desired settings, close the dryer door and press START (located on the right-hand side of the control panel). Opening the door during the operation will stop the dryer. To restart the dryer, close the door and select START to complete the cycle. 8. Stopping Your Dryer Your dryer can be stopped during any stage of the drying process, to allow you to check on your load or add/remove clothes. To do this, open the dryer door. There will be a slight delay as the drum slows down and stops. Note: If the cycle is interrupted before it progresses into COOL DOWN, parts of the drum may be hot. To start your dryer again, press START. 9. Changing Cycles During Operation If you wish to change the drying cycle you have chosen after the machine has already begun drying, press your new cycle selection on the control panel. 10. Fabric Softener Sheets If you want to use fabric softener sheets, you must ensure that they are labelled "dryer safe". Always follow the instructions on the packaging. Do not place them in a dryer with warm clothes as there is a chance the fabric softener may stain clothes. Only use a softener sheet once, then discard it. 11. Beeps At the end of the cycle, the dryer will beep to let you know that the load is finished. The drum will automatically come to rest, allowing you to open the door and remove your load. 37