Fender FA-100 Acoustic Pack Fender Acoustic Guitar Owner s Manual - Page 24
illustration 7, illustration 6, Stringing Classical/Nylon String Guitars,
View all Fender FA-100 Acoustic Pack manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Next, pull the string up over the nut towards the headstock and bend it around the tuning machine post toward the tuning machine button, (Figure 6) Thread the string through the hole in the post and begin winding the button to remove the slack in the string. Continue winding to form a neat coil. Finally, tune the string to the appropriate pitch. Pull up gently at the center point of the string to stretch it. Retune, and repeat, until unwanted slack is eliminated and the tuning of the strings is stabilized this will prevent slipping and save you tuning frustrations down the road. Set-up Stringing Classical/Nylon String Guitars: Fender classical guitars have a surface illustration 6 mounted bridge through which the strings are looped ("tie-on" strings), or fed ("ball-end" strings). illustration 7 To re-string a classical/nylon string guitar using "tie-on" strings, first form a double loop knot with the looped end of the string, (Figure 7). Feed the other end of the string through the appropriate hole in the bridge and then back and through the loop you just made, (Figure 8). Pull the string taught so that the pressure of the twisted loop holds the string in place on the 23