Fellowes DS-1 Manual - Page 3
English - shredder
View all Fellowes DS-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
SafeSense® Technology (yellow) Shredder head See safety instructions below Mesh basket SafeSense® override switch ENGLISH Model DS-1 Paper entry Disconnect power switch Overheated (red) Standby (green) Control switch Auto-On ( ) Off Reverse (R) Active Step Not active Breakthrough Safety Technology! SafeSense® stops shredding when hands are too close to the opening. Lift and remove basket - To Test SafeSense® Technology Shredder comes fully assembled. Remove basket packing material and plug in. Disconnect power switch must be in ON ( I ) position to operate shredder. Press Auto-On ( ) Touch test area Sensor lights up Magnetic safety interlock CAPABILITIES Will shred: Paper, small paper clips, credit cards and staples Will not shred: Continuous forms, adhesive labels, transparencies, newspaper, cardboard, large paper clips, laminates or plastic other than noted above Paper shred size: Confetti-Cut 5/32" x 1-3/8" (3.9 x 35mm) Maximum: Sheets per pass (Confetti-Cut 11* Cards per pass...1 Paper width...9"/229mm Continuous operation 4-5 minutes *20 lb., 8.5"x11" paper at 120v, 60 Hz, 4.5Amps; heavier paper, humidity or other than rated voltage may reduce capacity. Fellowes SafeSense® shredders are designed to be operated in home and office environments ranging between 50 - 80 degrees Fahrenheit (10 - 26 degrees Celsius) and 40 - 80% relative humidity. IMPORTANT SAFETY INSTRUCTIONS - Read Before Using! • Keep away from children and pets. Keep hands away from paper entry. Always unplug when not in use. • Keep foreign objects - gloves, jewelry, clothing, hair, etc.- 15 away from shredder openings. If object enters top 1o5pening, press and hold Reverse (R) to back out object. 15 • Avoid touching exposed blades under Confetti-Cut shredder head. 2 • Never use aerosol, petroleum-based or other flammable products on or near shredder. Do not use canned air on shredder. • Do not use if damaged or defective. Do not open shredder head. Do not place near or over heat or water source. • 11 sheets per pass to avoid jams. • The socket-outlet shall be installed near the equipment and shall be easily accessible.