Fellowes AeraMax PT65 Manual - Page 9

Care And Maintenance

Page 9 highlights

CARE AND MAINTENANCE CLEANING • Clean unit as necessary by wiping with a dry, soft cloth; for stubborn stains, use a warm, damp cloth. • Do not use volatile fluids such as benzene, paint thinner, or scouring powder, as they may damage the unit surface. • Keep the unit dry. Replacement Procedure WARNING: Before replacing any filters, make sure to remove the power plug from the wall outlet. 1. Remove the front panel by pushing in tabs on both sides of unit while pulling front panel back. Filter Replacement The replacement filter indicators will signal when to replace the HEPA Filter and/or Carbon Filter. The replacement period will vary depending on the hours of use and air quality. However, under normal usage, most HEPA Filters need to be replaced annually, and Carbon Filters every three months. Do not wash and reuse the HEPA or Carbon Filters-they will not work effectively. Only 2. Pull out the filters that need to be changed. use Fellowes brand AeraMax™ replacement filters. 3. Remove any packaging wrap from the new filter(s). For replacement filter part numbers, see page 4. 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

CARE AND MAINTENANCE
CLEANING
Clean unit as necessary by wiping with a
dry, soft cloth; for stubborn stains, use a
warm, damp cloth.
Do not use volatile fluids such as
benzene, paint thinner, or scouring
powder, as they may damage the
unit surface.
Keep the unit dry.
Filter Replacement
The replacement filter indicators will signal
when to replace the HEPA Filter and/or
Carbon Filter. The replacement period will
vary depending on the hours of use and air
quality. However, under normal usage, most
HEPA Filters need to be replaced annually,
and Carbon Filters every three months.
Do not wash and reuse the HEPA or Carbon
Filters—they will not work effectively. Only
use Fellowes brand AeraMax™ replacement
filters.
Replacement Procedure
1. Remove the front panel by pushing in
tabs on both sides of unit while pulling
front panel back.
2. Pull out the filters that need to be
changed.
3. Remove any packaging wrap from the
new filter(s).
For replacement filter part numbers, see
page 4.
WARNING:
Before replacing any
filters, make sure to remove the
power plug from the wall outlet.
9