Epson XP-7100 Start Here - Installation Guide - Page 2

Caution: Do not touch the areas shown below. Doing so may prevent normal operation and printing. 4 Load paper 4 Remove cap from each ink cartridge. Store the caps in the included plastic bag. Note: Save the caps and use them to recap the ink cartridges after removing them for storage or disposal. 5 Insert the cartridges at an angle in the holder for each color. Press each cartridge down until it clicks. Output tray Cassette 1 Cassette 2/front cover You can load the following paper sizes: • Cassette 1: 3.5 × 5-, 4 × 6-, or 5 × 7-inch photo paper • Cassette 2: Letter-, A4-, legal-size, or 8 × 10-inch paper See the online User's Guide for information about available paper types and sizes, loading capacities, and printing on CD/DVD/Blu-ray® discs. 1 Lower the front cover and raise the control panel. 6 Lower the scanner unit. 2 Pull out a paper cassette. 7 Select Installed to start charging the ink. Ink charging takes approximately 7 minutes. When you see a completion message on the printer's LCD screen, charging is complete. Caution: Don't turn off the printer or raise the scanner unit while the printer is charging or you'll waste ink. Note: • The printer is designed for use with Epson® cartridges only, not third-party cartridges or ink. • The cartridges included with the printer are designed for printer setup and not for resale. After some ink is used for charging, the rest is available for printing. • As part of setup, your product's serial number will be sent to a secure Epson server so that you can be eligible to participate in programs we may offer from time to time, including the Epson ink replenishment program. You will have a separate opportunity to consent to participating in such programs. 8 Follow the on-screen instructions to adjust the print quality of your product. Note: • You need to load paper before you can adjust the print quality. See "Load paper" below for details. • Select Adjust Later on the printer's LCD screen if you want to adjust the print quality later. For more information, see the online User's Guide. Cassette 1 Cassette 2 3 Slide the side edge guides outward and set the front edge guide to the paper size you are using. Cassette 1 Cassette 2 4 Insert the paper with the glossy or printable side facedown. Cassette 1 Cassette 2 Note: Make sure the paper is loaded against the back of the cassette and not sticking out from the front of the cassette.