Epson WorkForce Pro WF-C5390 Start Here - Installation Guide - Page 2
Install ink supply units(ink packs), Load paper, WF-C5390, Installed - color printer
![]() |
View all Epson WorkForce Pro WF-C5390 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
3 Install ink supply units (ink packs) Caution: Keep the ink packs out of the reach of children and do not drink the ink. Note: The included initial ink packs are designed for reliable printer setup and cannot be used as replacement ink packs or resold. After setup, the remaining ink is available for printing. 1 Unlock and open the ink pack tray cover. 6 Insert the ink pack tray into the printer. Repeat steps 2 to 6 for the other ink packs. Note: The ink packs are keyed to fit into the correct color slot. If you cannot insert the ink pack tray all the way, do not force it. Make sure the ink pack color matches the color slot on the printer. 7 Close the ink pack tray cover and lock it. 2 Press an ink pack tray to release it, then pull the tray out. 3 Remove and discard the protective piece from the ink pack tray. 4 Shake an ink pack 10 times, then remove it from the packaging. Note: Do not touch the green chip on the ink pack. 8 WF-C5390: Select Installed using the arrow buttons and press the OK button to start charging the ink. WF-C5890: Select OK on the LCD screen to start charging the ink. Ink charging takes approximately 9 minutes. A message appears when ink charging is complete. Caution: Do not unplug or turn off the product, raise the printer cover or scanner unit, or open the ink tray cover while the product is charging or you'll waste ink. 9 Follow the instructions on the LCD screen to adjust the print quality. Note: You need to load paper before you can adjust the print quality. See "Load paper" for details. 4 Load paper See the online User's Guide for information about loading capacity, available paper types and sizes, loading envelopes, and using the rear paper feed slot or ADF (WF-C5890). 1 Make sure the product is done charging the ink, then pull out the paper cassette. 5 Move the handle forward, place the ink pack into the ink pack tray, then move the handle back to its original position. 2 Slide the side edge guides all the way out and set the front edge guide to the paper size you are using. Note: Make sure the ink pack is fully inserted and level with the top of the ink pack tray.
![](/manual_guide/products/epson-workforce-pro-wfc5890-start-installation-guide-772bd92/2.png)