Epson WorkForce Pro ST-C5000 Start Here - Installation Guide - Page 2

Load paper, Follow steps 12 and 13 to continue ink charging., Proceed, Start, Close, Settings

Get Epson WorkForce Pro ST-C5000 PDF manuals and user guides View all Epson WorkForce Pro ST-C5000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 2 highlights

3 Insert the ink bottle into the filling port. Note: Do not force the bottle into position; each bottle is keyed for each color. 4 Wait for the ink to empty into the tank. Do not squeeze the bottle. Note: If ink does not flow from the bottle, lift and reinsert the bottle. 5 When the bottle is empty, remove it and securely close it with the bottle cap. Note: Do not leave the bottle inserted; otherwise it may be damaged or ink may leak. 6 Securely close the black ink tank cap. 10 Raise the control panel, then press the power button to turn on the product. Note: If an error code appears, turn off the product and check that no protective material has been left inside the product and that the transportation lock is in the printing position. 11 Select your language, country, date, and time settings. Note: You can change these settings later using the product's control panel. For more information, see the online User's Guide. Follow steps 12 and 13 to continue ink charging. 12 When the message to see the Start Here sheet appears on the LCD screen, press and hold OK for 5 seconds. 13 When the ink confirmation message appears on the LCD screen, select Proceed for each color, then press Start to start charging the ink. Ink charging takes approximately 9 minutes. A message appears when ink charging is complete. Press Close to proceed with initial setup. Caution: Do not unplug or turn off the product, raise the scanner unit, or load paper while the product is charging or you'll waste ink. 7 Repeat the previous steps for the other colors. 8 Close the ink tank cover. 9 Connect the power cord to the back of the product and to an electrical outlet. Note: Part of the ink from the included bottles is used for printer setup. You will notice ink levels in the tanks decrease during charging. This decrease is normal and does not affect the stated in-box yields. 14 To finish filling the ink tanks, repeat steps 1 through 8 using the additional set of ink bottles included with the product. If any ink remains in the bottles, close the bottles and store them for later use. Note: Replace the bottle cap before disposing of the bottles. 15 Select Settings > Maintenance > Fill Ink and follow the on-screen instructions to reset the ink levels. 3 Load paper See the online User's Guide for information about loading capacity, available paper types and sizes, loading envelopes, and using the rear paper feed slot or Automatic Document Feeder (ADF). 1 Make sure the product is not charging ink, then pull out one of the paper cassettes. Caution: Do not connect to your computer yet.

  • 1
  • 2
  • 3
  • 4
10
Raise the control panel, then press the
power button to
turn on the product.
Note:
If an error code appears, turn off the product and check
that no protective material has been left inside the product and
that the transportation lock is in the printing position.
11
Select your language, country, date, and time settings.
Note:
You can change these settings later using the product’s
control panel. For more information, see the online
User’s Guide
.
Follow steps 12 and 13 to continue ink charging.
12
When the message to see the
Start Here
sheet appears
on the LCD screen, press and hold
OK
for 5 seconds.
13
When the ink confirmation message appears on the LCD
screen, select
Proceed
for each color, then press
Start
to
start charging the ink. Ink charging takes approximately
9 minutes. A message appears when ink charging is
complete. Press
Close
to proceed with initial setup.
Caution:
Do not unplug or turn off the product, raise the
scanner unit, or load paper while the product is charging or you’ll
waste ink.
Note:
Part of the ink from the included bottles is used for printer
setup. You will notice ink levels in the tanks decrease during
charging. This decrease is normal and does not affect the stated
in-box yields.
14
To finish filling the ink tanks, repeat steps 1 through 8
using the additional set of ink bottles included with the
product. If any ink remains in the bottles, close the bottles
and store them for later use.
Note:
Replace the bottle cap before disposing of the bottles.
15
Select
Settings
>
Maintenance
>
Fill Ink
and follow the
on-screen instructions to reset the ink levels.
3
Load paper
See the online
User’s Guide
for information about loading
capacity, available paper types and sizes, loading envelopes,
and using the rear paper feed slot or Automatic Document
Feeder (ADF).
1
Make sure the product is not charging ink, then pull out
one of the paper cassettes.
3
Insert the ink bottle into the filling port.
Note:
Do not force the bottle into position; each bottle is keyed
for each color.
4
Wait for the ink to empty into the tank. Do not squeeze
the bottle.
Note:
If ink does not flow from the bottle, lift and reinsert the
bottle.
5
When the bottle is empty, remove it and
securely close it with the bottle cap.
Note:
Do not leave the bottle inserted; otherwise it
may be damaged or ink may leak.
6
Securely close the black ink tank cap.
7
Repeat the previous steps for the other colors.
8
Close the ink tank cover.
9
Connect the power cord to the back of the product and to
an electrical outlet.
Caution:
Do not connect to your computer yet.