Epson V11H303020 Start Here - Page 2
Connect your video source, Set up the remote control
UPC - 010343868175
View all Epson V11H303020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
2 Connect your video source Connect the projector to a computer or video source using any of the available connections shown below. • Check the connectors on your video equipment. If more than one connection is available, choose the one that provides the best quality. The projector connectors from highest to lowest quality are Computer (Component Video), S-Video, and Video. • A computer cable is included. You can purchase optional video and audio cables through Epson or an electronics store. • You can connect up to 4 video devices and use the remote control to switch between them. S-Video cable (optional) RCA video cable (composite video) (optional) Component video to VGA cable (optional) Computer cable (included) L-Audio-R ports Audio2 and Audio1 ports You can also connect an external monitor to watch the display on your computer monitor while watching the projection screen (when the computer cable is connected to the Computer1 port). To enhance the sound in your presentation, you can connect external speakers. See the User's Guide on your CD-ROM for instructions. 3 Set up the remote control 1 Remove the battery cover. 2 Insert the batteries. 3 Replace the battery cover. The remote control is ready for use.