Epson V11H298920 User's Guide - Page 128
facing the right way., Once the lamp is fully inserted, tighten its screws.
View all Epson V11H298920 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
4. Loosen the two screws holding the lamp in place (you can't remove them). Loosen, but don't remove these screws note The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash. 5. Hold the lamp as shown and pull it straight out. 6. Gently insert the new lamp. (If it doesn't fit easily, make sure it is facing the right way.) 7. Once the lamp is fully inserted, tighten its screws. 128 Maintaining the Projector
128
Maintaining the Projector
4.
Loosen the two screws holding the lamp in place (you can’t
remove them).
5.
Hold the lamp as shown and pull it straight out.
6.
Gently insert the new lamp. (If it doesn’t fit easily, make sure it is
facing the right way.)
7.
Once the lamp is fully inserted, tighten its screws.
Loosen, but don’t
remove these screws
note
The lamp(s) in this
product contain mercury.
Please consult your state and
local regulations regarding
disposal or recycling. Do not
put in the trash.