Epson V11H283020 User's Guide - Page 40
Shutting Down the Projector, You see a confirmation message.
View all Epson V11H283020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
3. Choose Direct Power On and press Enter. 4. Highlight On and press Enter. 5. Press Menu to exit. The setting will take effect the next time you plug in the projector. note Lamp life results will vary depending upon mode selected, environmental conditions, and usage. Turn off this product when not in use to prolong the life of the projector. You can set the projector to automatically turn off the lamp and enter "sleep mode" when it has not received any signals for 1 to 30 minutes (see page 66). This conserves electricity, cools the projector, and extends the life of the lamp. If you want to start projecting again, press the P power button. If you are done using the projector, unplug the power cord. Shutting Down the Projector This projector incorporates Instant Off technology. To turn it off, you can press its Ppower button as described below, unplug it, or turn off a power switch that supplies power to the projector. You don't have to wait for the projector to cool down first. 1. To turn off the projector, press the Ppower button on the remote control or projector. You see a confirmation message. (If you don't want to turn it off, press any other button.) 2. Press the Ppower button again. The projection lamp turns off and the projector beeps twice. You can then unplug the power cord. If you want to turn the projector on again, make sure the orange Ppower light is not flashing, then press the Ppower button. 40 Setting Up the Projector