Epson V11H270020 User Manual - Page 72
Problems when projection starts, Check, Remedy
View all Epson V11H270020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Problem Solving 72 f Problems when projection starts f Power does not turn on Check Did you press the [t] button? Are the indicators switched off? Do the indicators turn on and off when the power cable is touched? Is the Control Panel Lock set to "Full Lock"? Is the correct setting for the remote receiver selected? Remedy Press the t button to turn the power on. The power cable is not connected correctly or power is not being supplied normally. Disconnect and then reconnect the power cable. s Quick Start Guide Check that your electrical outlet or power source is functioning correctly. There is probably a poor contact in the power cable, or the power cable may be defective. Reinsert the power cable. If this does not solve the problem, stop using the projector, disconnect the power cable from the electrical outlet, and contact your local dealer or the nearest address provided in the Support and Service Guide. s Epson Projector Contact List Press the [t] button on the remote control. If you do not want to use "Control Panel Lock", change the setting to "Off". s "Settings" - "Control Panel Lock" p.35 Check the "Remote Receiver" from the configuration menu. s "Settings" - "Remote receiver" p.43