Epson V11H157020 User Manual - Page 75
the projector. Then slide the cover closed and tighten the screws.
UPC - 010343850842
View all Epson V11H157020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
8. Once the lamp is fully inserted, tighten its screws. note Be sure to seat the lamp fully and secure the lamp cover. If the lamp is not properly installed or the cover is loose, the lamp will not turn on. 9. Lower the lamp cover into place. (The opening should be almost covered, and the top of the cover should be flush with the top of the projector.) Then slide the cover closed and tighten the screws. 10. Reset the lamp timer as described in the next section. Maintaining and Transporting the Projector 75
Maintaining and Transporting the Projector
75
8.
Once the lamp is fully inserted, tighten its screws.
9.
Lower the lamp cover into place. (The opening should be almost
covered, and the top of the cover should be flush with the top of
the projector.) Then slide the cover closed and tighten the screws.
10.
Reset the lamp timer as described in the next section.
note
Be sure to seat the lamp fully
and secure the lamp cover. If
the lamp is not properly
installed or the cover is loose,
the lamp will not turn on.