Epson V11H157020 Operation Guide - EMP Monitor v4.30 - Page 8
Limitations imposed by a Windows Vista environment., Before starting operations, environment.
UPC - 010343850842
View all Epson V11H157020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Operating environment 8 Limitations imposed by a Windows Vista environment. When using EMP Monitor under Windows Vista, note the following limitations. • You must have administrator authority in order to use Register at startup on the Environment setup screen of EMP Monitor. • Even after EMP Monitor has been uninstalled, the settings and log information will remain on the hard disk. If this information is no longer required, you may delete the EMP Monitor V4.30 folder. Provided the default settings were used at installation, this folder can be found at: "C:\Users\(User Name)\AppData\Local\VirtualStore\Program Files\EPSON Projector\EMP Monitor V4.30" Before starting operations Check the following points before starting up EMP Monitor. • EMP Monitor must be installed on the computer to be used for monitoring and control. • The computer and the projectors must be connected to the network. • If using Windows 2000/Windows NT4.0/Windows XP/Windows Vista, the computer must be started up in Administrator mode. • Depending on the projector model, a commercially-available serial TCP/IP conversion adapter and a connection cable are required in order to use EMP Monitor. s Projector User's Guide " Make the settings for the serial TCP/IP conversion adapter before connecting to the projector.