Epson U675P User Manual - Page 12
MICR Option factory option, Reading MICR Characters On Personal Checks, CAUTION
View all Epson U675P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
English MICR Option (factory option) Reading MICR Characters On Personal Checks CAUTION: Do not insert checks with staples in them. This may cause paper jams, MICR reading errors, and damage to the MICR head. Be sure the checks are flat, without curls, folds, or wrinkles. 1. Wait until the SLIP light blinks. Then insert the check face up with the right side of the check against the right side of the paper inlet as far as it will go. Be sure that the MICR characters are on the right. MICR characters on this side face up 2. The printer will detect the check and start drawing it in. When the printer starts drawing it in, let go of the check immediately. When the printer ejects the check and the SLIP light starts blinking again; remove the check by pulling it straight up; do not pull it at an angle. Cleaning the MICR Mechanism Once a year clean the MICR head with a moistened cleaning sheet. Use the following or an equivalent commercially available cleaning sheet: PRESAT brand (KIC) "CHECK READER CLEANING CARD." Note: Be sure not to use an adhesive cleaning sheet. 10 TM-U675/TM-U675P User's Manual