Epson TM-T88V Users Manual - Page 17

English When using USB/Ethernet/Wireless LAN Interface DIP Switch Bank 1 DIP Switch Bank 2 SW Function ON OFF 1-1 Auto line feed Always enabled Always disabled 1-2 Receive buffer capacity 45 bytes 4KB 1-3~ 1-8*1 Undefined *1: When using the USB interface on a model with a serial or parallel interface, the function of DIP switch 1-8 is as follows. SW Function ON 1-8 Power saving function Disabled for USB OFF Enabled SW Function ON OFF 2-1 Handshaking (BUSY condition) Receive buffer Offline or full Receive buffer full 2-2 Do not change settings Fixed to OFF 2-3 Print density 2-4 See Table B 2-5 Release condition of Releases BUSY Releases BUSY receive buffer BUSY when remaining when remaining (If receive buffer receive buffer receive buffer capacity set to 4KB.) capacity capacity reaches reaches 138 bytes. 256 bytes. 2-6 Do not change 2-7 setting. Fixed to OFF 2-8 Do not change setting. *2 *2: Whether DIP switch 2-8 is set to ON or OFF is dependent on the printer model. Table B Print density/low power Print density "Normal" Print density "Medium" Print density "Dark" Do not set SW2-3 OFF ON OFF ON SW2-4 OFF OFF ON ON Specifications 80 mm paper width 58 mm paper width*1 Printing method Thermal line printing Dot density 180 dpi ×180 dpi [dots per 25.4 mm {1"}] Printing direction Unidirectional with friction feed Printing width 72 mm {2.83"}, 512 dot positions 50.8 mm {2.0"}, 360 dot positions Characters per line Font A: 42; Font B: 56 (default) Font A: 30; Font B: 40 Character spacing (default) Font A: 0.28 mm {.01"} (2 dots), Font B: 0.28 mm {.01"} (2 dots) Character size Standard/Double-height/Double-width/Double-width and Double-height Font A: 1.41 × 3.39/1.41 × 6.77/2.82 × 3.39/2.82 × 6.77 mm Font B: 0.99 × 2.40/0.99 × 4.80/1.98 × 2.40/1.98 × 4.80 mm Character structure Font A (default): 12 × 24; Font B: 9 × 17 (including 2-dot horizontal spacing) Number of characters Alphanumeric characters: 95; International character sets: 18 sets Extended graphics: 128 × 43 pages (including user-defined page) Printing speed 300 mm/s {11.8"/s} max.; 70.9 lps (4.23 mm {1/6"} feed) Ladder bar code and 2D code: 100 mm/s {2.4"/s} The above speed values are approximate. The values are when the printer prints with density "Normal" at 24 V and 25°C {77°F} Speed is adjusted automatically depending on the voltage applied and head temperature. TM-T88V User's Manual 17