Epson TM-T20II UB-S01 Users Manual - Page 1
Epson TM-T20II Manual
View all Epson TM-T20II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Copyright © 1997 by Seiko Epson Corporation Printed in China User's Manual Standards and Approvals The following standards are applied only to the interface boards that are so labeled. (EMC is tested using the EPSON power supplies and TM series printers.) FCC Compliance Statement For American Users Europe: CE marking This equipment has been tested and found to North America: FCC/ICES-003 Class A comply with the limits for a Class A digital device, Japan: VCCI Class A pursuant to Part 15 of the FCC Rules. These limits Oceania: AS/NZS CISPR22 Class A are designed to provide reasonable protection against harmful interference when the equipment is CE Marking operated in a commercial environment. These products conform to the following Directive and norms: This equipment generates, uses, and can radiate radio frequency energy and, if not installed and Directive 2004/108/EC used in accordance with the instruction manual, EN 55022 Class A may cause harmful interference to radio EN 55024 IEC 61000-4-2 communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required IEC 61000-4-3 to correct the interference at his own expense. IEC 61000-4-4 IEC 61000-4-5 IEC 61000-4-6 IEC 61000-4-11 WARNING For Canadian Users This Class A digital apparatus complies with Canadian ICES-003. À l'intention des utilisateurs This is a Class A product. In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate measures. The printers in which this board is installed becomes class A devices. canadiens Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. The connection of a non-shielded printer interface cable to the board will invalidate the EMC standards of this device. You are cautioned that changes or modifications not expressly approved by Seiko Epson Corporation could void your authority to operate the equipment. Introduction This manual describes how to replace the UB-S01 on TM series printers designed for this board. You must check the printer DIP switches after replacing the UB-S01. See the documentation that came with the printer for information about setting the DIP switches. About The Symbol In This Manual CAUTION: Cautions must be observed to avoid minor injury to yourself or damage to your equipment. 1