Epson TM-L90II LFC Technical Reference Guide - Page 40

Memory Switch 6 SW 6-1 6-2 6-3 6-4 6-5 6-6 to 6-7 6-8 Function Autocutting position Auto scaling for 40/58 mm width paper *1 Auto top margin scaling*2 Selection of the characters per line for 80 mm width paper*3 Reserved Paper width selection*4 ON OFF Cut at black mark position Cut regardless of black mark position Enabled Disabled Enabled Disabled See the table below. "Selection of the characters per line for 80 mm width paper (compatible mode)" on page 40 - - 58 mm/80 mm 40 mm/80 mm *1: For details about the characters per line and character specifications with this function enabled, see "Details of Characters Per Line and Character Specifications with Auto Scaling Enabled" on page 76. *2: Enabled when printing continues after autocutting. To set the function using the software setting mode, select [11. Top margin reduction] - [11.2 when Paper removal standby is invalid]. *3: With the 67*/68*(multilingual) models, the functions for the memory switches 6-3/6-4/6-5 are reserved and unavailable. *4: With the 65* model, the function for memory switch 6-8 is reserved and unavailable. Selection of the characters per line for 80 mm width paper (compatible mode) Compatible mode TM-T88 compatible mode (1) TM-T88 compatible mode (2) TM-L90 compatible mode Font A 42 44 48 Characters per line Font B 55 57 64 6-4 ON ON OFF Memory Switch 6 6-5 ON OFF OFF The printing and autocutting positions change depending on the software setting. For details, see "Printing and Cutting Positions" on page 90. 40