Epson SureColor T2170 Start Here - Installation Guide - Page 2
Install Ink Cartridges
View all Epson SureColor T2170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
8 Press the sides of the protective piece, and then lift and remove it. 9 Remove the protective film from the control panel. Install Ink Cartridges Note: • The printer is designed for use with Epson® cartridges only, not third-party cartridges or ink. • The cartridges included with the printer are designed for printer setup and not for resale. After some ink is used for initializing, the rest is available for printing. 1 Connect the power cord to the printer. Route the cord through the hooks on the back of the printer and plug the other end of the power cord into an outlet. Note: The touchscreen will not operate if you do not remove the protective film. 10 Remove the tape and the protective piece. 2 Press the power button on the control panel to turn on the printer. Raise the control panel if necessary. 11 Close the front cover. 12 Open the cut sheet cover and remove the tape inside the printer. 13 Open and fold back the roll paper cover. 3 Select your language on the LCD screen. 4 When you see a message about removing protective parts, select Done. 5 Select the date and time. Note: Select See Guide to view additional instructions. 6 Follow the prompts to begin ink initialization. 7 Open the front cover. 14 Remove the tape and the protective pieces. 8 Pull and lift the tab on the ink cartridge cover to open the cover. Remove the protective paper covering the ink ports. 15 Close the roll paper cover and the cut sheet cover. 16 Dispose of all the tape and the protective pieces.