Epson SureColor P5000 Commercial Edition Start Here - Installation Guide - Page 1
Epson SureColor P5000 Commercial Edition Manual
View all Epson SureColor P5000 Commercial Edition manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Epson® SureColor® P5000 Series Start Here Read these instructions before using your product. Unpack 1 Make sure you have these items: 6 Replace the paper cassette and output tray. 7 Remove the tape from the back of the printer. Note: Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. Warning: The product is heavy and should be lifted and moved by two people. 2 Remove the tape from the front of the printer. Turn on and configure 1 Connect the power cable. 2 Remove the packing materials inside the ink compartments. 2 Lift the edge of the output tray to remove it. 3 Remove the ink cartridges from their packages, then gently shake each cartridge for about 15 seconds. 3 Slide out the paper cassette, then pull it out. Caution: Do not touch the green chip on the cartridge. 4 Insert the cartridges in the slot for each color. Push the cartridges in until they click. 4 Slide the edge guides outward. 3 Lift the edge of the output tray and pull it out to remove it. 4 Remove all packing materials and tape from the output tray. 5 Pull out the paper cassette and open the top cover. Remove all packing materials and tape from inside the product, then close the top cover. Caution: Do not connect the printer to your computer yet. 2 Press the power button to turn on the printer. 3 Select the ink set that was included with your printer on the control panel. Note: • This setting cannot be changed once the initial ink charging process begins. • Initialization takes about one minute. Do not install ink cartridges before this process is complete. Install ink cartridges Use the ink cartridges that came with your printer for initial ink charging. 1 Press the left and right ink compartment covers to open them. 5 Close the ink cartridge covers. 6 The printer begins charging the ink. This takes about 20 minutes. Do not turn off the printer, load paper, or open any covers until the process is complete. Caution: Don't turn off or interrupt the printer while the ink is charging or you'll waste ink. Note: • The printer is designed for use with Epson® cartridges only, not third-party cartridges or ink. • The cartridges included with the printer are designed for printer setup and not for resale. After some ink is used for charging, the rest is available for printing. Load paper Note: For instructions on using the rear manual feed or loading thick paper, see the Quick Reference Guide. Paper cassette You can load a stack of paper of the same size and type in the paper cassette. For available paper types and instructions on loading paper larger than A3 size, see the online User's Guide. 1 On the control panel, press the button and press the button to select Cut Sheet. Press the OK button. The icon appears on the LCD screen. 5 Thumb through a stack of paper, then gently tap it on a flat surface to even the edges. 6 Load the paper with the printable side facedown and short edge first. Place the paper all the way back in the paper cassette and next to the right edge. Make sure the paper fits under the arrow on the left edge guide. Note: When loading paper sized 13 x19" or larger, make sure you install the paper cassette cover to prevent dust from entering the cassette.