Epson SP9880CB User's Guide - Page 41
Charging is finished when the, When messages appear on the LCD display, follow the instructions
View all Epson SP9880CB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Setting Up the Printer | 41 4. Install the ink cartridges in the printer. Hold each cartridge with the arrow pointing toward the printer, then insert it into its slot. Make sure you insert each cartridge all the way into the correct slot and that you see the corresponding ink cartridge icon on the LCD display. Caution: Charging takes about 12 minutes. Never turn off the printer, release the paper lever, or open the front cover while the P Power light is flashing, or you may damage the printer. 5. After installing all 8 cartridges, lower the ink levers. The printer begins charging the ink delivery system and the P Power light flashes. 6. When messages appear on the LCD display, follow the instructions to raise or lower the ink levers, and to close the ink compartment covers. Charging is finished when the P Power light stays lit green and the PAPER OUT message appears. After ink charging is completed, you need to load paper before READY will appear on the display. See page 45 for instructions. 41