Epson Pro L1500UH Users Guide - Page 236

Event ID code 0483 04FE 0479 04FF 0891 0892 0893 0894 0898 0899 089A 089B 089C 089D 0920 Cause and solution The network software quit unexpectedly. Check the network communication status, then turn the projector off and then on again. A projector system error has occurred. Turn the projector off and then on again. Cannot find an access point with the same SSID. Set your computer, access point, and projector to the same SSID. The WPA/WPA2 authentication type does not match. Make sure the wireless network security settings are correct. The TKIP/AES encryption type does not match. Make sure the wireless network security settings are correct. Communication with unauthorized access point was disconnected. Contact your network administrator. Failed to acquire DHCP. Make sure the DHCP server is operating correctly. If you are not using DHCP, turn off the DHCP setting in the Network menus. Communication error. Turn the projector off and then on again. The projector's EAP authentication type does not match the network. Check the wireless LAN security settings and make sure that the security certificate is installed correctly. EAP server authentication failed. Check the wireless LAN security settings and make sure that the security certificate is installed correctly. EAP client authentication failed. Check the wireless LAN security settings and make sure that the security certificate is installed correctly. Key exchange failed. Check the wireless LAN security settings and make sure that the security certificate is installed correctly. The internal power supply that saves your clock settings is running low. Contact Epson for help. Parent topic: Projector Information Display - Info Menu 236