Epson Pro L1070U Users Guide - Page 58
Wireless Network Projection, Wired LAN, Enter, IP Address, Subnet, Gateway Address, IP Address Display
View all Epson Pro L1070U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
7. Select the Wired LAN menu and press Enter. 8. Select your IP Settings as necessary: • If your network assigns addresses automatically, turn on the DHCP setting. • If you must set addresses manually, turn off DHCP and enter the projector's IP Address, Subnet Mask, and Gateway Address as needed. Note: To highlight the numbers you want from the displayed keyboard, press the arrow buttons on the remote control. To select a highlighted number, press Enter. 9. To prevent display of the IP address on the standby screen, turn off IP Address Display. 10. To connect the projector to the network using IPv6, select On as the IPv6 Settings option. Then select the Auto Configuration and Use Temporary Address settings as necessary. 11. When you finish selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus. Parent topic: Wired Network Projection Wireless Network Projection You can project over a wireless network. To do this, you must set up your projector and computer for wireless projection. 58