Epson Mobilink TM-P80II Plus Epson POS Printer WebAPI Interface Specification - Page 19

"ClientCertificate" settings can be set as below. Name Value type Value ClientCert string Client Certificate Max 5k bytes in ASCII ClientCertKey string Key of Client Certificate Max 5k bytes in ASCII CSR string CSR Max 5k bytes in ASCII CSRKey string Key of CSR Max 5k bytes in ASCII CACert1 string Certificate of Client Certificate issuer Max 5k bytes in ASCII CACert2 string Certificate of CACert1 issuer Max 5k bytes in ASCII Table 3-12 IPsecIPFiltering Client Certificate Settings "IEEE8021X" consist of two portions, settings "Basic" and "ClientCertificate". "Basic" settings can be set as below. Name Value type Value EnableIEEE8021X int IEEE802.1X(Wired LAN) 0 : Disable 1 : Enable EAPType UserID Password ServerID EnableCertValidate AnonymousName EncryptionStrength WiFiEnable ConnectionMode int string string string int string int int int EnableIEEE802.1X is effective against IEEE802.1X working on the wired LAN. If you want to enable WPA2-Enterprise ((EEE802.1X(Wi-Fi)), the following WiFiEnable MUST be set to 1 (Enable) and SecuritySetting MUST be set to 7 (WPA2-Enterprise). EAP Type 0 : EAP-TLS 1 : PEAP-TLS 2 : PEAP/MSCHAPv2 User ID 0 - 128 bytes in ASCII Password 1 - 128 bytes in ASCII When "EAPType" is not set to PEAP/MSCHAPv2, this item is unnecessary. Server ID 0 - 128 bytes in ASCII Enables Certificate validation 0 : Disable 1 : Enable Anonymous Name 0 - 128 bytes in ASCII When "EAPType" is EAP-TLS, this item is unnecessary. Encryption Strength 1 : Medium 2 : High Wi-Fi Enable 0 : Disable(Wired LAN Enable) 1 : Enable Same as WiFiEnable of NetworkSettings > WiFi Connection Mode 0 : Infrastructure 1 : Adhoc Same as ConnectionMode of NetworkSettings > WiFi Epson POS Printer WebAPI Interface Specification M00152300 Revision A September 8, 2022 Page: 19