Epson KDS Expansion Box KD-IB01 KDS Quick User Manual - Sound Devices - Page 2
How to Con Sound Devices
View all Epson KDS Expansion Box KD-IB01 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
How to Configure Sound Devices This procedure assumes that you already have a Single-Station KDS system setup as described in the Epson KDS Single-Station Quick Start Guide. However this procedure can be followed to configure a sound device for any KDS device. 1. Connect your speaker into the USB port of the printer. Figure 1.1 - USB-A Audio Cable Connection Figure 1.2 - 3.5mm Audio Cable Connection 2. In the KDS Utility, select the Devices configuration. 3. Select the Device that has the USB speaker/adapter connected. Figure 1.3 - Select KDS device for audio Sound Devices Quick User Manual 111-38-QUM-004 Rev 2.50
Sound Devices
Quick User Manual
111-38-QUM-004
Rev 2.50
How to Configure Sound Devices
This procedure assumes that you already have a Single-Station KDS system setup as
described in the Epson KDS Single-Station Quick Start Guide.
However this procedure
can be followed to configure a sound device for any KDS device.
1.
Connect your speaker into the USB port of the printer.
Figure 1.1
–
USB-A Audio Cable Connection
Figure 1.2
–
3.5mm Audio Cable Connection
2.
In the KDS Utility, select the
Devices
configuration.
3.
Select the
Device
that has the USB speaker/adapter connected.
Figure 1.3
–
Select KDS device for audio