Epson ET-7750 Users Guide - Page 44
Using WPS to Connect to a Network, Printing a Network Status Sheet
View all Epson ET-7750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Parent topic: Wi-Fi or Wired Networking Using WPS to Connect to a Network If you have a WPS-enabled wireless router or access point, you can use Wi-Fi Protected Setup (WPS) to connect your product to the network. 1. On the product, press the home button, if necessary. 2. Press the arrow buttons to select Settings and press the OK button. 3. Select Network Settings and press the OK button. 4. Select Wi-Fi Setup and press the OK button. 5. Select Push Button Setup (WPS) and press the OK button. 6. Follow the instructions on the LCD screen to complete WPS setup. Your product should now display a WiFi symbol on the LCD screen. If it does not, repeat these steps to try again. Parent topic: Wi-Fi Protected Setup (WPS) Printing a Network Status Sheet You can print a network status sheet to help you determine the causes of any problems you may have using your product on a network. Make sure paper is loaded in the cassette. 1. Press the home button, if necessary. 44