Epson ET-2650 Start Here - Installation Guide
Epson ET-2650 Manual
 |
View all Epson ET-2650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson ET-2650 manual content summary:
- Epson ET-2650 | Start Here - Installation Guide - Page 1
ón en www.epson.com/support/et2650sp (requiere una conexión a Internet). 1 Unpack 3 Lower the scanner unit. 2 Fill ink tanks Note: This product requires careful handling of ink. Wear disposable gloves and place a sheet of paper or plastic under the ink tank when you fill or refill the ink tanks, as - Epson ET-2650 | Start Here - Installation Guide - Page 2
bottles included with the printer are designed for printer setup and not for resale. After some ink is used for charging, the rest is available for printing. Caution: Do not turn off the product or load paper while the product is charging or you'll waste ink. 3 Load paper 1 Make sure the product - Epson ET-2650 | Start Here - Installation Guide - Page 3
icon to select the print option. • Print remotely with Epson Connect™ and Google Cloud Print™. See your online User's Guide for instructions or learn more at www.epsonconnect.com. 6 Select the paper settings on the product's control panel. 4 Install software Note: If your computer does not have - Epson ET-2650 | Start Here - Installation Guide - Page 4
notice. Toll or long distance charges may apply. Recycling Epson offers a recycling program for end of life hardware and ink bottles. Please go to www.epson.com/recycle for information on how to return your products for proper disposal. ET-2650 refill inks Color Black Cyan Magenta Yellow Part
-
1 -
2 -
3 -
4
 |
 |
Start Here
Read these instructions before using your product.
Note for Spanish speakers/Nota para hispanohablantes:
Para
obtener instrucciones de configuración en español, consulte la
Guía
de instalación
en
www.epson.com/support/et2650sp
(requiere una
conexión a Internet).
1
Unpack
Note:
Do not open the ink bottles until you are ready to fill the ink
tanks. The ink bottles are vacuum packed to maintain reliability. Ink
bottle design may vary.
1
Remove all protective materials from the product.
2
Lift up the scanner unit and remove all protective materials
from inside the product.
Caution:
Do not touch the flat white cable or the ink tubes and
their translucent cover.
3
Lower the scanner unit.
2
Fill ink tanks
Note:
This product requires careful handling of ink. Wear disposable
gloves and place a sheet of paper or plastic under the ink tank when
you fill or refill the ink tanks, as ink may splatter. If ink spills, wipe it off
immediately with a damp towel to avoid permanent stains. If ink gets on
your clothes or belongings, it may not come off.
Warning:
Keep the ink bottles out of the reach of children and do not
drink the ink.
1
Open the ink tank cover, then remove the cap for the black
ink tank and attach it to its holder.
2
Unpack the black ink bottle.
3
Depending on the ink bottle included with your product,
snap off the bottle tip or unscrew the lid.
4
Remove the bottle cap. Carefully remove the protective
seal (avoid touching the ink underneath the seal), then
close the bottle cap tightly.
Caution:
Be sure to close the bottle cap tightly, or ink may leak.
ET-2650