Epson ET-2600 Start Here - Installation Guide

Epson ET-2600 Manual

Get Epson ET-2600 PDF manuals and user guides View all Epson ET-2600 manuals
Add to My Manuals
Save this manual to your list of manuals

Epson ET-2600 manual content summary:

  • Epson ET-2600 | Start Here - Installation Guide - Page 1
    ET-2600 Start Here Read these instructions before using your product. Note for Spanish speakers/Nota para hispanohablantes: Para obtener instrucciones de configuración en español, consulte la Guía de instalación en www.epson.com/support/et2600sp (requiere una conexión a Internet). 1 Unpack 3 Lower
  • Epson ET-2600 | Start Here - Installation Guide - Page 2
    when the power light stops flashing. 3 seconds 20 minutes Note: The ink bottles included with the printer are designed for printer setup and not for resale. After some ink is used for charging, the rest is available for printing. Caution: Do not turn off the product or load paper while the
  • Epson ET-2600 | Start Here - Installation Guide - Page 3
    lines or incorrect colors in my printouts Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary. See the online User's Guide for more information. Setup is unable to find my product after connecting it with a USB cable Make sure the product
  • Epson ET-2600 | Start Here - Installation Guide - Page 4
    printers. Find Genuine Epson Ink and specialty papers at www.epson.com (U.S. sales) or www.epson.ca (Canadian sales) and at Epson authorized resellers. Call 800-GO-EPSON (800-463-7766). ET-2600 refill inks Color Black Cyan Magenta Yellow Part number 664 664 664 664 Any questions? Quick Guide
  • 1
  • 2
  • 3
  • 4
Start Here
Read these instructions before using your product.
Note for Spanish speakers/Nota para hispanohablantes:
Para
obtener instrucciones de configuración en español, consulte la
Guía
de instalación
en
www.epson.com/support/et2600sp
(requiere una
conexión a Internet).
1
Unpack
Note:
Do not open the ink bottles until you are ready to fill the ink
tanks. The ink bottles are vacuum packed to maintain reliability. Ink
bottle design may vary.
1
Remove all protective materials from the product.
2
Lift up the scanner unit and remove all protective materials
from inside the product.
Caution:
Do not touch the flat white cable or the ink tubes and
their translucent cover.
3
Lower the scanner unit.
2
Fill ink tanks
Note:
This product requires careful handling of ink. Wear disposable
gloves and place a sheet of paper or plastic under the ink tank when
you fill or refill the ink tanks, as ink may splatter. If ink spills, wipe it off
immediately with a damp towel to avoid permanent stains. If ink gets on
your clothes or belongings, it may not come off.
Warning:
Keep the ink bottles out of the reach of children and do not
drink the ink.
1
Open the ink tank cover, then remove the cap for the black
ink tank and attach it to its holder.
2
Unpack the black ink bottle.
3
Depending on the ink bottle included with your product,
snap off the bottle tip or unscrew the lid.
4
Remove the bottle cap. Carefully remove the protective
seal (avoid touching the ink underneath the seal), then
close the bottle cap tightly.
Caution:
Be sure to close the bottle cap tightly, or ink may leak.
ET-2600