Epson ET-15000 Start Here - Installation Guide
Epson ET-15000 Manual
 |
View all Epson ET-15000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson ET-15000 manual content summary:
- Epson ET-15000 | Start Here - Installation Guide - Page 1
ET-15000 Start Here IMPORTANT: Before using this product, make sure you read these instructions and the safety instructions in the online User's Guide. Important Safety Instructions: When using telephone equipment, you should always follow basic safety precautions to reduce the risk of fire, - Epson ET-15000 | Start Here - Installation Guide - Page 2
ink is below the lowest line could damage the product. See the online User's Guide for refilling instructions. 6 When the ink tank is full, remove the ink or load paper while the product is charging or you'll waste ink. 8 Repeat the previous steps for the other colors. 9 Close the ink tank cover. - Epson ET-15000 | Start Here - Installation Guide - Page 3
CD (Windows only) or download and run your product's software package. For the latest software, visit www.epson.com/support/et15000 (U.S.) or www.epson.ca/support/et15000 (Canada). 3 Follow the instructions on the computer screen to run the setup program. 4 When you see the Select Your Connection - Epson ET-15000 | Start Here - Installation Guide - Page 4
printers. Find Epson papers and Epson Genuine Ink at www.epson.com (U.S. sales) or www.epson.ca (Canadian sales) and at Epson authorized resellers. Call 800-GO-EPSON (800-463-7766). ET-15000 replacement inks Color Black Cyan Magenta Yellow Part number 502 502 502 502 Any questions? User's Guide
-
1 -
2 -
3 -
4
 |
 |
Start Here
IMPORTANT:
Before using this product, make sure you read
these instructions and the safety instructions in the online
User’s
Guide
.
Important Safety Instructions:
When using telephone equipment, you
should always follow basic safety precautions to reduce the risk of fire,
electric shock, and personal injury, including the following:
• Do not use the Epson
®
product near water.
• Always keep this guide handy.
• Avoid using a telephone during an electrical storm. There may be a
remote risk of electric shock from lightning.
•
Do not use a telephone to report a gas leak in the vicinity of the leak.
Caution:
To reduce the risk of fire, use only a No. 26 AWG or larger
telecommunication line cord.
1
Unpack
Note:
Do not open the ink bottles until you are ready to fill the ink
tanks. The ink bottles are vacuum packed to maintain reliability.
1
Remove all protective materials from the product.
2
Lift up the scanner unit until it locks into place and
remove all protective materials from inside the product.
Caution:
Do not touch the flat white cable or the ink tubes and
their translucent cover.
2
Fill ink tanks
Warning:
Keep the ink bottles out of the reach of children and do not
drink the ink.
Caution:
This product requires careful handling of ink. If ink spills,
wipe it off immediately with a damp towel to avoid permanent stains.
If ink gets on your clothes or belongings, it may not come off.
Note:
• Epson cannot guarantee the quality or reliability of third-party ink.
• Use the ink bottles included with the printer to set up the product.
Part of the ink will be used to charge the print head. These bottles
may print fewer pages compared with replacement ink bottles.
1
Make sure that the transportation lock is in the down
position.
2
Open the ink tank cover, then open the cap for the
black ink. Refer to the color-coded sticker to identify the
color of each tank.
3
Unpack the black (BK) ink bottle. Hold the ink bottle
upright and slowly turn the bottle cap to remove it.
Caution:
Do not shake or squeeze the ink bottles. Do not touch
the top of the ink bottle after its cap is removed.
4
Insert the ink bottle into the filling port.
Note:
Do not force the bottles into position; they are keyed for
each color.
ET-15000
ET15000_SH_E_CPD58144.indd
1