Epson EB-PU2010B Quick Reference Guide - Page 2
Turning the Projector On, Changing the Language ofthe Projector Menus, Switching Between ImageSources
View all Epson EB-PU2010B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Turning the Projector On 1. Turn on your computer or image source. 2. Remove the lens cover. 3. Press the On button on the projector or the remote control. After the status light stays blue, the projector is ready. Note: If the Direct Power On function is enabled, you can turn the projector on without pressing the On button; just plug it in or flip the switch controlling the outlet to which the projector is connected. To turn on this feature, see the online User's Guide. 4. If your image does not appear, see "Switching Between Image Sources" or "Troubleshooting." Changing the Language of the Projector Menus The default language of the projector's menu system is English, but you can change it as necessary. 1. Press the Menu button to access the projector's menu system. 2. Select Extended > Language. 3. Select your language. 4. When you're done, press the Menu button to exit. Switching Between Image Sources Press the Search button or one of the source buttons (remote control), or the Source Search button (projector). Selecting the Lens Type Make sure the Lens Type setting is correct for the lens you are using. 1. Press the Menu button. 2. Select Extended > Operation > Advanced > Lens Type. N ote: If the Lens Type setting is greyed out, the projector has automatically detected the installed lens and you can skip the remaining steps. 3. Select the lens you are using. 4. When you're done, press the Menu button to exit. Changing Screen Type Set the Screen Type setting to the screen's aspect ratio. 1. Press the Menu button. 2. Select Extended > Display > Screen > Screen Type. 3. Select the screen's aspect ratio. N ote: The displayed image should match the screen's size and aspect ratio.