Epson ActionPC 2600 Product Information Guide

Epson ActionPC 2600 Manual

Epson ActionPC 2600 manual content summary:

  • Epson ActionPC 2600 | Product Information Guide - Page 1
    burst cycles Trident 9440AGI high-performance PCI local bus GUI accelerator controller supports resolutions up to 1024 x 768 in 256 colors with 1MB of DRAM ATA-2 compatible two-channel, PCI local bus IDE interfaces on system board support up to four IDE devices (two on each channel); CD-ROM drives
  • Epson ActionPC 2600 | Product Information Guide - Page 2
    into system board for fixed or multifrequency monitor; 15-pin, D-shell connector One standard, multimode parallel interface built into system board; supports &bit unidirectional, 16-bit bidirectional, and EPP/ECP (Enhanced Parallel Port/Extended Capability Port) modes; 25-pin, D-shell connector
  • Epson ActionPC 2600 | Product Information Guide - Page 3
    EPSON ActionPC 2600, ActionPC 5500 System Board Components The diagram below illustrates the components on the ActionPC 2600/ActionPC 5500 board. The table following it describes these components. 8/31/95 ActionPC 2600, ActionPC 5500 - 3
  • Epson ActionPC 2600 | Product Information Guide - Page 4
    EPSON ActionPC 2600, ActionPC 5500 System board components CPU type jumper settings Intel or AMD CPU type I Intel 3-4 3-4. 3-4 3-4 5-6 1-2 1-2 1-2 1-2 2-3 2-3 2-3 2-3 1-2 11-2 12-3 Open 1 Open 12-3 JP1 Jumper Settings Miscellaneous jumper settings * Default setting Parallel port ECP
  • Epson ActionPC 2600 | Product Information Guide - Page 5
    Upgrades The computer's processor can be upgraded by replacing the existing processor with a faster one. The following table lists supported processors and voltages. Supported processors 64MB I64MB I4MB I132MB l If you install SlMMs In both Bank 1 and Bank 2, SIMM types must match. Use
  • Epson ActionPC 2600 | Product Information Guide - Page 6
    EPSON ActionPC 2600, ActionPC 5500 Hard disk drive parameters (continued) IDE hard disk drive jumper settings DMA Assignments Hardware Interrupts IRQ no. 1 Function IRQ0 1 Timer output 0 IRQ1 1 Keyboard IRQ2 1 Cascade to IRQ9 IRQ7 IRQ8 IRQ9 IRQ10 IRQ11 IRQ12 IRQ13 IRQ14 1 IRQ15 Parallel port 1 (
  • Epson ActionPC 2600 | Product Information Guide - Page 7
    System Z/O address map (continued) Connector Pin Assignments Parallel port connector pin assignments (CN13) EPSON ActionPC 2600, ActionPC 5500 VGA port connector pin assignments (VCN1) Power (SPEED) LED connector pin assignments (CN4) Pin Signal 1 Pull up 220 2 LED Turbo Pin Signal 3
  • Epson ActionPC 2600 | Product Information Guide - Page 8
    EPSON ActionPC 2600, ActionPC 5500 Option card riser board connector pin assignments Pin I Signal 1 lvcc 2 Vcc 3 INTA* 4 INTC 5 PCIRST 1 Pin 1 Signal 151 1 IOCHK* 52 SD7 53 SD6 54 SD5 55 SD4 1 Pin 1 Signal 101 1VCC 102 INTB* 103 INTD 104 REQ#2 105 Not used 1 Pin 1 Signal 151 I RSTDRV 152 Vcc
  • Epson ActionPC 2600 | Product Information Guide - Page 9
    new environments become available, these also will be tested. Installation/Support Tips Installing Diskette Drives Cl Make sure that the drive window. You can then enter the drive's parameters yourself. Software Problems Cl When installing a copy-protected software package, first try the
  • Epson ActionPC 2600 | Product Information Guide - Page 10
    Information Reference List Engineering Change Notices None. Technical Information Bulletins None. Product Support Bulletins None. Related Documentation TM-APC26/55 EPSON ActionPC 2600, ActionPC 5500 Service Manual PL-APC26/55 EPSON ActionPC 2600, ActionPC 5500 Parts Price List 400521400
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10

EPSON ActionPC 2600, ActionPC 5500
(SPEED)
light
hard disk drive
/
(HDD) light
WER
I
I
diskette
drive
button
AC outlet
/
//
I
\
keyboard
mouse serial 1
serial
2
printer
Computer Specifications
‘VGA
monitor
CPU and Memory
32-bit CPU
Green PC
energy saver
Upgradable 486-class processor
Energy Star compliant, low-power doze,
sleep, and suspend modes for the CPU,
hard disk drive, and video signals sent by
the computer to the monitor; select
time-out periods in SETUP; in a standard
configuration of one hard disk drive and
one
diskette drive, system consumes less
than 30 Watts in sleep mode
System speed
Fast and slow system clock speeds
available; fast is the speed of the processor
and slow is 8 MHz; from MS-DOS, speed
selectable by keyboard command
Memory
ROM
Video RAM
Shadow RAM
Cache
Math
coprocessor
Clock/calendar
Controllers
PCI Chipset
Video
Diskette
Hard disk
4MB RAM (ActionPC 2600) or 8MB RAM
(ActionPC 5500, 4MB on system board);
expandable to 132MB; two SIMM sockets;
SIMMs must be tin-plated, 72-pin, 32-bit,
fast-page mode type with access speed of
70ns or faster
1MB flash ROM BIOS, video BIOS, and
SETUP code located in flash ROM on
system
board; 128KB subsystem BIOS
ROM
512KB or 1 MB DRAM on system board;
expandable to 2MB using additional
512KB, 40-pin, SOJ flat pack video DRAM
chips
Supports shadowing of system and video
BIOS ROM into RAM and in SETUP
program
At least 8KB of internal
cache in the
processor; supports 128 or 256KB of
external cache with 32K x 8, 15 or 20ns
SRAM DIP chips and a 32K x 8 tag chip
Math coprocessor built into the processor
on all DX and Intel Pentium OverDrive.
processors
Real-time clock, calendar, and CMOS
RAM soldered
on
system board with
integrated Lithium battery
Provides postwrite buffers, memory and
control for the PCI bus, and the
two-channel PCI IDE interface; integrated
PCI bridge translates CPU bus cycles to
PCI bus cycles and CPU-to-PCI memory
write cycles to PCI burst cycles
Trident 9440AGI high-performance PCI
local bus GUI accelerator controller
supports resolutions up to 1024 x 768
in 256 colors with 1MB of DRAM;
1280 x 1024 in 256 colors with 2MB of
DRAM
Controller on system board supports up
to two diskette drives or
one
diskette and
one tape drive
Two PCI, ATA-2 compatible two-channel,
PCI local bus IDE interfaces on system
board support up to four IDE devices (two
on each channel); CD-ROM drives cannot
be connected to the same channel as hard
disk drives; BIOS provides hard disk
auto-detection and enhanced IDE
functions, and supports PIO modes 0-4
8/31/95
ActionPC 2600, ActionPC 5500 - 1