Electrolux ECFG3068AS Installation Instructions - Page 4

Product Dimensions, Cabinet clearances

Get Electrolux ECFG3068AS PDF manuals and user guides View all Electrolux ECFG3068AS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 4 highlights

30" FULL GAS RANGE INSTALLATION INSTRUCTIONS Product Dimensions Cabinet clearances A 760 mm 29" 15/16" B1 min: 654 mm max: 658 mm C2 1186 mm min: 25 3/4" max: 25 14/16" 46 11/16" D min: 898 mm max: 930 mm min: 35 6/16" max: 36 5/8" 1. Measurement B varies according to the type of installation: the minimum is obtained without the rear spacers (see "Island installation") and the maximum is obtained for traditional installation (slide-in installation with the rear spacers). 2. Measurement C refers to the open door. E min. 762 mm min. 30" F 628 mm 24" 5/8 G min. 508 mm min. 20" H min. 762 mm min. 30" I min. 457 mm min. 18" J see notes below K max. 330 mm max. 13" Clearance J can have the following values: • J = 36" / 914 mm minimum clearance between the top of the cooking surface and the bottom of an unprotected wood or metal cabinet. • J = 30" / 762 mm minimum when the bottom of wood or metal cabinet is protected by not less than 1/4-inch-thick flame-retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015-inch-thick stainless steel, 0.024-inch-thick aluminum, or 0.020-inch-thick copper. Clearances from non-combustible materials are not part of the ANSI Z21.1 scope and are not certified by CSA. Clearances of less than 30'' should be approved by the local codes and/or by the local authority having jurisdiction. 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
4
30” FULL GAS RANGE INSTALLATION INSTRUCTIONS
Product Dimensions
1. Measurement
B
varies according to the type
of installation: the minimum is obtained with-
out the rear spacers (see "Island installa-
tion") and the maximum is obtained for
traditional installation (slide-in installation -
with the rear spacers).
2. Measurement
C
refers to the open door.
Cabinet clearances
Clearance
J
can have the following values:
•
J = 36” / 914 mm
minimum clearance between
the top of the cooking surface and the bottom of
an unprotected wood or metal cabinet.
•
J = 30” / 762 mm
minimum when the bottom of
wood or metal cabinet is protected by not less
than 1/4-inch-thick flame-retardant millboard cov-
ered with not less than No. 28 MSG sheet steel,
0.015-inch-thick stainless steel, 0.024-inch-thick
aluminum, or 0.020-inch-thick copper. Clearances
from non-combustible materials are not part of the
ANSI Z21.1 scope and are not certified by CSA.
Clearances of less than 30'' should be approved
by the local codes and/or by the local authority
having jurisdiction.
A
760 mm
29” 15/16”
B
1
min: 654 mm
max: 658 mm
min: 25 3/4"
max: 25 14/16”
C
2
1186 mm
46 11/16"
D
min: 898 mm
max: 930 mm
min: 35 6/16"
max: 36 5/8"
E
min. 762 mm
min. 30”
F
628 mm
24” 5/8
G
min. 508 mm
min. 20”
H
min. 762 mm
min. 30”
I
min. 457 mm
min. 18”
J
see notes below
K
max. 330 mm
max. 13”